747547-8 TE Connectivity, 747547-8 Datasheet

KIT,PLUG,25P,HDE,SHLD HDWRE

747547-8

Manufacturer Part Number
747547-8
Description
KIT,PLUG,25P,HDE,SHLD HDWRE
Manufacturer
TE Connectivity
Datasheets

Specifications of 747547-8

Product Type
Connector
Product Series
HDE-20 (IDC)
Wire/cable Type
Discrete Wire, Round Jacketed Cable
Termination Method To Wire/cable
Insulation Displacement Crimp (IDC)
Wire Insulation Diameter (mm [in])
1.52 [0.060]
Mating Connector Lock
With
Mating Connector Lock Type
Mounting Holes
Shell Size
3
Shell Type
Front Metal Shell
Grounding Indents
With
Insulation Support
Yes
Grade
Standard
Color
Black
Shell Material
Steel
Shield Material
Steel
Shielded
Yes
Solder Tail Contact Plating
Tin over Nickel
Number Of Positions
25
Wire Range (mm² [awg])
0.05 - 0.15 [30-26]
Pre-assembled
No
Cable Insulation Diameter (mm [in])
4.19 – 11.56 [0.165 – 0.455]
Shell Plating
Tin
Shield Plating
Tin
Insert Material
Thermoplastic
Insert Flammability Rating
UL 94V-0
Cable Diameter (max.) (mm [in])
11.56 [0.455]
Preloaded
Yes
Contact Type
Pin
Contact Base Material
Phosphor Bronze
Contact Plating, Mating Area, Material
Gold (30)
Contact Size
20
Enclosure
With
Connector Style
Plug
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Packaging Method
Bulk

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
747547-8
Manufacturer:
TE Connectivity AMP Connectors
Quantity:
457
1.
1.1.
1.2.
2.
2.1.
3.
3.1.
3.2.
3.3.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
Content
This specification covers the performance, tests and quality requirements for AMPLIMITE* HDE
connector with (removable) insulation displacement (and "F" crimp) contacts in a one piece plastic
housing, with or without a metal shell. The assemblies can contain a combination of insulation
displacement and "F" crimp HDE contacts.
Qualification
When tests are performed on the subject product line, the procedures specified in 109-Series Test
Specifications shall be used. All inspections shall be performed using the applicable inspection plan
and product drawing.
APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. In the event of
conflict between the requirements of this specification and the product drawing, the product drawing
shall take precedence. In the event of conflict between the requirements of this specification and the
referenced documents, this specification shall take precedence.
TE Connectivity (TE) Documents
A.
B.
C.
D.
E.
REQUIREMENTS
Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable
product drawing.
Materials
A.
B.
Ratings
A.
B.
C.
109-1:
109 Series:
114-40002:
114-40003:
501-115:
Contact: Phosphor bronze, gold on mating end, tin plated on crimp end.
Housing: Glass filled polyester, black, UL 94V-0
Voltage: 250 vac
Current: Fully loaded and energized connectors
1.
2.
3.
4.
5.
6.
Temperature: -55° to 105°C
30-28
26
24
22
20
18 F crimp 3.7 A
Product
Specification
AMPLIMITE* HDE-20 Insulation Displacement Connector
| Indicates Change
*Trademark
General Requirements for Test Specifications
Test Specifications as indicated in Figure 1.
Application Specification, Contact, AMPLIMITE, HDE-20
Application Specification, Contact, AMPLIMITE, HDE-20,"F" Crimp
Test Report
AWG 1.0 A
AWG 1.5 A
AWG 2.0 A
AWG 2.4 A
AWG 3.0 A
Other products, logos, and company names might be trademarks of their respective owners.
For latest revision, visit out website at www.te.com/documents
For Regional Customer service, visit our website at www.te.com
108-40011
11 Mar 11 Rev C
1 of 7
LOC B

Related parts for 747547-8

747547-8 Summary of contents

Page 1

... F crimp 3 Temperature: -55° to 105°C ©2011 Tyco Electronics Corporation, | Indicates Change a TE Connectivity Ltd. Company *Trademark All Rights Reserved TE logo is a trademark. For latest revision, visit out website at www.te.com/documents For Regional Customer service, visit our website at www.te.com Other products, logos, and company names might be trademarks of their respective owners. ...

Page 2

Performance and Test Description The product is designed to meet the electrical, mechanical and environmental performance requirements specified in Figure 1. All tests are performed at ambient temperature unless otherwise specified. 3.5. Test Requirements and Procedures Summary Test Description ...

Page 3

Test Description Contact Insertion Force Contact Retention Contact Engaging Force Contact Separating Force Crimp Tensile Durability Thermal Shock Humidity-Temperature Cycling Mixed Flowing Gas Rev C Requirement 3 pounds maximum per contact. Contacts shall not dislodge from the connector housing. 8 ...

Page 4

Test Description Temperature Life Shall meet visual requirements, show no physical damage, and shall meet NOTE requirements of additional tests as specified in the test sequence in Figure 2. 3.6. Product Qualification and Requalification Tests Test of Examination Examination of ...

Page 5

QUALITY ASSURANCE PROVISIONS 4.1. Qualification Testing A. Sample Selection Connectors housings and contacts shall be prepared in accordance with applicable Instruction Sheets. They shall be selected at random from current production. Test groups and 4 shall ...

Page 6

Receptacle connector to be mounted on vibration fixture unless otherwise NOTE specified. Rev C Figure 3 Mounting and Clamping Locations for Vibration and Physical Shock 108-40011 ...

Page 7

Resistance and Temperature Measurement Points 1. Gage material: 100-97 NOTES 2. Heat treat to Rc 68-70 3. This gage is for contact size 20 4. Pin to comply with MS 3197 5. Finish: 6-10 microinches rms Rev C Figure 4 ...

Related keywords