86566-8 TE Connectivity, 86566-8 Datasheet - Page 5

• Manufacturer Part Number: 86566-8
• Description: FFC RECPT CRIMP SI
• Manufacturer: TE Connectivity

Specifications of 86566-8

• Rohs Compliant: NO
• Product Type: Contact
• Termination Method To Wire/cable: Crimp
• Wire/cable Type: Round Wire, Discrete
• Wire Insulation Diameter (mm [in]): 1.02 – 1.42 [0.040 – 0.056]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Wire Range (mm [awg]): 0.12-0.40² [26-22]
• Centerline (mm [in]): 2.54 [0.100]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Tin-Lead
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Packaging Method: Strip

assurance shall coordinate requalification testing, consisting of all or part of original testing sequence as
determ ined by developm ent/product, quality and reliability engineering.
4.3.
Acceptance is based on verification that product m eets requirem ents of Figure 1. Failures attributed to
equipm ent, test setup or operator deficiencies shall not disqualify product. W hen product failure occurs,
corrective action shall be taken and sam ples resubm itted for qualification. Testing to confirm corrective action is
required before resubm ittal.
4.4.
Applicable AMP quality inspection plan will specify sam pling acceptable quality level to be used. Dim ensional
and functional requirem ents shall be in accordance with applicable product drawing and this specification.
Rev L
Acceptance
Quality Conform ance Inspection
(Connector to AMPMODU connector assem bly)
Term ination Resistance Measurem ent Points
Figure 3
108-9024
5 of 7