MAX1197ECM+TD Maxim Integrated Products, MAX1197ECM+TD Datasheet - Page 20

• Manufacturer Part Number: MAX1197ECM+TD
• Description: IC ADC 8BIT 60MSPS DL 48-TQFP
• Manufacturer: Maxim Integrated Products

Specifications of MAX1197ECM+TD

• Number Of Bits: 8
• Sampling Rate (per Second): 60M
• Data Interface: Parallel
• Number Of Converters: 2
• Power Dissipation (max): 150mW
• Voltage Supply Source: Single Supply
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-TQFP Exposed Pad, 48-eTQFP, 48-HTQFP, 48-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Dual, 8-Bit, 60Msps, 3V, Low-Power ADC with
Internal Reference and Parallel Outputs
For a waveform perfectly reconstructed from digital
samples, the theoretical maximum SNR is the ratio of
the full-scale analog input (RMS value) to the RMS
quantization error (residual error). The ideal, theoretical
minimum analog-to-digital noise is caused by quantiza-
tion error only and results directly from the ADC’s reso-
lution (N-bits):
In reality, there are other noise sources besides quanti-
zation noise: thermal noise, reference noise, clock jitter,
etc. SNR is computed by taking the ratio of the RMS
signal to the RMS noise, which includes all spectral
components minus the fundamental, the first five har-
monics, and the DC offset.
SINAD is computed by taking the ratio of the RMS sig-
nal to all spectral components minus the fundamental
and the DC offset.
Effective number of bits (ENOB) specifies the dynamic
performance of an ADC at a specific input frequency
and sampling rate. An ideal ADC’s error consists of
quantization noise only. ENOB for a full-scale sinusoidal
input waveform is computed from:
20
______________________________________________________________________________________
SNR
dB[max]
ENOB
Signal-to-Noise Plus Distortion
=
= 6.02
Effective Number of Bits
SINAD
Signal-to-Noise Ratio
dB
6 02
.
✕
−1 76
N + 1.76
.
dB
THD is typically the ratio of the RMS sum of the first four
harmonics of the input signal to the fundamental itself.
This is expressed as:
where V
V
harmonics.
Spurious-free dynamic range (SFDR) is the ratio
expressed in decibels of the RMS amplitude of the fun-
damental (maximum signal component) to the RMS
value of the next largest spurious component, exclud-
ing DC offset.
The two-tone intermodulation distortion (IMD) is the
ratio expressed in decibels of either input tone to the
worst third-order (or higher) intermodulation products.
The individual input tone levels are at -7dB full scale
and their envelope is at -1dB full scale.
TRANSISTOR COUNT: 11,601
PROCESS: CMOS
5
are the amplitudes of the 2nd- through 5th-order
1
THD
is the fundamental amplitude, and V
=
20
Spurious-Free Dynamic Range
×
log
Intermodulation Distortion
Total Harmonic Distortion
V
2
2
Chip Information
+
V
3
2
V
+
1
V
4
2
+
V
5
2
2
through