P1010-RDB Freescale Semiconductor, P1010-RDB Datasheet - Page 2

• Manufacturer Part Number: P1010-RDB
• Description: P1010-RDB For P1010/14
• Manufacturer: Freescale Semiconductor
• Series: QorlQ™r

Specifications of P1010-RDB

• Mcu Supported Families: P1010, P1014
• Kit Features: Supports Trust Architecture, 1GB DDR3, USB2.0, TDM Interface To SLIC For VoIP Applications
• Rohs Compliant: Yes
• Main Purpose: Reference Design, Networking
• Embedded: Yes, MCU, 16/32-Bit
• Utilized Ic / Part: P1010
• Primary Attributes: 1 GB DDR3, 2 PCIe, 2 SATA, 3 GB Ethernet Port
• Secondary Attributes: -
• Peak Reflow Compatible (260 C): Yes
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

The QorIQ P1010 and P1014 processors
integrate a rich set of interfaces, including
SerDes, Gigabit Ethernet, PCI Express
controllers (P1010 only) and USB plus a
USB PHY. The three 10/100/1000 Ethernet
ports support advanced packet parsing, flow
control and quality of service features, as well
as IEEE
managing the data path traffic between the
LAN and WAN interface. A TDM interface can
support voice for legacy phone applications.
Six SerDes lanes can be portioned across
two PCI Express ports, the Ethernet and SATA
ports for versatility and convenience. The PCI
Express ports can provide connectivity to
IEEE 802.11n radio cards for wireless support.
USB, SATA or SD/MMC interfaces can be
used to support local storage. An integrated
USB PHY lowers the application bill of
materials and provides proven performance.
Two DUARTs and dual FlexCAN interfaces
provide the flexibility required by demanding
industrial applications including factory
automation and control.
Target Applications
The P1010 and P1014 processors serve in
a wide variety of applications. The devices
are well-suited for low-cost networking and
network attached storage applications. With
an available junction temperature range of
-40ºC to +125ºC, the devices can be used in
power-sensitive industrial applications and
outdoor environments less protected from
the environment. The devices’ primary target
applications are networking attached storage
and digital video surveillance where read/write
performance to storage is paramount.
QorIQ Device
®
P1010
P1014
1588 time stamping—all ideal for
Freescale, the Freescale logo and PowerQUICC are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.
QorIQ is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective
owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are
trademarks and service marks licensed by Power.org. © 2010 Freescale Semiconductor, Inc.
Document Number: QP1010FS
REV 0
Top Core Frequency
800 MHz
800 MHz
®
CAN
L2 Size
256 KB
256 KB
A low-cost router/switch application benefits
from the combination of high general purpose
performance as well as the networking
performance provide by the software fast
path networking drivers that accelerate
IP forwarding, NAT firewall and IP sec
applications to line rate on certain usage
models with low power. The P1010 and P1014
devices offer a scalable platform to develop
a range of products that can support the
same feature set. Integrated 10/100/1000
Ethernet controllers with classification and
QoS capabilities are ideal for managing the
traffic between the LAN and WAN interface.
PCI Express ports can provide connectivity to
IEEE 802.11n radio cards for wireless support,
TDM for legacy phone interfaces to support
voice, the USB, SATA or SD/MMC interfaces
can be used to support local or network
attached storage and the CAN interface can
be used to provide an interface for industrial
protocols. The integrated security engine can
provide encrypted secure communications
for remote users with VPN support and the
trusted platform provides an end to end
solution for secure boot and code signing.
• Single e500 core, built on Power
• 256 KB L2 cache with ECC, also
Technical Specifications
Architecture technology
configurable as SRAM and stashing
memory
36-bit physical addressing
Double-precision floating-point support
32 KB L1 instruction cache and 32 KB L1
data cache
533 MHz to 800 MHz core clock
frequency
16/32-bit @ 800 MHz
16-bit @ 800 MHz
DDR 3 Support
Learn More:
GE Ports
3
2
• Three 10/100/1000 Mbps enhanced three-
• High-speed interfaces (not all available
• One USB controller (USB 2.0) with
• Serial peripheral interface
• Trusted boot platform, integrated security
• 16/32-bit DDR3/DDR3L SDRAM memory
• Four-channel DMA controller
• Two I
• Integrated flash controller (IFC) with
• 32 general-purpose I/O signals
• Package: 425-pin TEPBGA1, 0.8 mm pitch,
For current information about Freescale
products and documentation, please visit
freescale.com/QorIQ.
SATA
2
2
speed Ethernet controllers (eTSECs)
simultaneously)
integrated PHY, host, OTG and device
support
engine (SEC 4.0)
controller with ECC support
enhanced capabilities to support large
pages
19 mm x 19 mm
TCP/IP acceleration and classification
capabilities
IEEE 1588 support
Lossless flow control
RGMII, SGMII
Six SerDes to 3.125 GHz multiplexed
across controllers
Two PCI Express controllers
Two SGMII interfaces
Two SATA interfaces
Crypto algorithm support includes 3DES,
AES, RSA/ECC, MD5/SHA, ARC4,
Snow 3G, and FIPS deterministic RNG
Single pass encryption/message
authentication for common security
protocols (IPsec, SSL, SRTP, WiMAX)
XOR acceleration
2
C controllers, two DUARTs, timers
PCI Express
2
2
®
Security
Trusted
No
CAN
No
2