19.91.9.012.4000 FINDER, 19.91.9.012.4000 Datasheet - Page 6

• Manufacturer Part Number: 19.91.9.012.4000
• Description: RELAY, POWER MODULE, 1CO, 10A
• Manufacturer: FINDER

Specifications of 19.91.9.012.4000

• Ip/nema Rating: 20
• Supply Voltage: 12VDC
• Contact Configuration: 1 CO
• Contact Current Max: 16A
• Contact Rating: 250V Ac
• External Depth: 60.8mm
• External Length / Height: 88.8mm
• External Width: 17.5mm
• No.: RoHS Compliant
• Svhc: No SVHC (20-Jun-2011)
• Rohs Compliant: Yes

Features
Analogue override module - Auto/Hand
(0…10)V
•
•
•
•
Application examples:
•
Wiring diagram
6
For outline drawing see page 11
(0…10)V Signal specification (terminal Y-in)
Input control signal
Green LED 25%
Green LED 50%
Green LED 75%
Feedback output specification (terminals 51-52)
Output configuration
Maximum / Minimum current
Rated voltage
Supply & Input specification
Nominal voltage (U
Rated power AC/DC
Operating range
Technical data
Ambient temperature range
Protection category
Approvals (according to type)
Analogue output module intended to provide,
by the selection switch on the front panel, a
(0…10) V output, automatically or by hand.
With the selector switch in position “A“
(Automatic) the (0…10) V signal is derived
from the controller.
In position “H” (Hand) the controller signal is
ignored and the (0…10) V signal is derived
directly from the potentiometer setting on the
facia of the module
The level of the (0…10) V output signal is
displayed by 3 green LEDs, set at >25%,
>50% and >75%.
24V AC/DC supply
35 mm rail (EN 60715) mounting
valves under exceptional circumstances or
where the automatic controller has failed
permits the direct control of proportional
Controller, PLC
N
)
V AC (50/60 Hz)
VA (50 Hz)/W
Type 19.50
V AC/DC
V DC
V DC
AC
DC
mA
19 Series - Override & Status indicating modules
Switch position:
53-54 feed back information to the controller for Auto-operation
Y in -A2 / Hand = Set point (set value) (0…10) V DC;
Auto-Operation
Request
0…10 (Imax 20mA - short-circuit protected)
requested by the controller or manual
•
•
•
plus 1 feedback output contact
Analogue output (0…10)V,
17.5 mm wide
LED indicator
19.50.0.024.0000
1 NO (SPST-NO)
(0.8…1.1) U
(0.8…1.1) U
–20…+50 °C
0.9 / 0.7
100 /10
>2.5 V
>7.5 V
> 5 V
IP20
24
24
24
Response
Intervention-(Manual-)Operation
N
N
LED Signals