LVR016K TE Connectivity, LVR016K Datasheet - Page 24

• Manufacturer Part Number: LVR016K
• Description: Resettable Fuse
• Manufacturer: TE Connectivity
• Series: LVRr

Specifications of LVR016K

• Holding Current: 160mA
• Tripping Current: 370mA
• Initial Resistance Max: 4.1ohm
• Operating Voltage: 240V
• Initial Resistance Min: 2.5ohm
• Peak Reflow Compatible (260 C): No
• Lead Spacing: 5.8mm
• Length: 13.8mm
• Rohs Compliant: Yes
• Holding Current Max Ih: 0.16A
• Approval Bodies: CSA, TUV
• Approval Category: UL Recognised
• External Depth: 3.8mm
• External: RoHS Compliant
• Ul File Number: E74889
• Csa File Number: 78165C
• Vmax Operating (v): 240
• Vmax Interrupt (v Rms): 265
• Imax Interrupt (a): 2
• Ih (room Temperature) (a): 0.16
• It (room Temperature) (a): 0.37
• Rmin (?): 2.50
• Rmax (?): 4.100
• R1 Max [post Trip] (?): 7.80
• Power Dissipation (typical) (w): 1.40
• Construction: Radial
• Lead Type: Kinked
• Family Name: LVR
• Coating: Coated
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Tuv Certificate No.: R72041437
• Operating Temperature (max.) (°c): 85
• Application: Radial
• Packaging Method: Bulk

4
Table R5. Physical Characteristics and Environmental Specifications for Radial-leaded Devices continued
RGEF
Physical Characteristics
Lead material
Soldering characteristics
Solder heat withstand
Insulating material
Devices are not designed to be placed through a reflow process.
RGE/RGEF
Environmental Specifications
Test
Passive aging
Humidity aging
Thermal shock
Solvent resistance
RHE
Physical Characteristics
Lead material
Soldering characteristics
Solder heat withstand
Insulating material
Devices are not designed to be placed through a reflow process.
RHEF
Physical Characteristics
Lead material
Soldering characteristics
Solder heat withstand
Insulating material
Devices are not designed to be placed through a reflow process.
RHE/RHEF
Environmental Specifications
Test
Passive aging
Humidity aging
Thermal shock
Solvent resistance
Devices are not designed to be placed through a reflow process.
Notes:
Storage conditions: 40°C max., 70% RH max.; devices should remain in original sealed bags prior to use. Devices may not meet specified values if these
storage conditions are exceeded.
For the TR device series, see the Telecommunications and Networking section.
Agency recognitions for Radial-leaded Devices
UL
CSA
TÜV
240
PolySwitch Radial-leaded Resettable Devices
RGEF300 to RGEF1100: Tin-plated copper, 0.52mm
RGEF1200 and RGEF1400: Tin-plated copper, 0.82mm
Solderability per ANSI/J-STD 002 Category 3
RGEF300K and RGEF400: per IEC 68-2-20, Test Tb, Method 1a, condition a; can withstand 5 seconds at 260°C ± 5°C
RGEF500 to RGEF1400: per IEC 68-2-20 Test Tb, Method 1a, condition b; can withstand 10 seconds at 260°C ± 5°C
Cured, flame-retardant epoxy polymer; meets UL 94V-0
Conditions
-40°C, 1000 hours
85°C, 1000 hours
85°C, 85% RH, 1000 hours
85°C, -40°C (10 times)
MIL-STD-202, Method 215F
RHEF050 to RHEF400: Tin/lead -plated copper clad steel, 0.205mm
RHEF450 to RHEF1000: Tin/lead-plated copper, 0.52mm
RHEF1300, RHEF1500: Tin/lead-plated copper, 0.82mm
Solderability per ANSI/J-STD 002 Category 3
Per IEC 68-2-20, Test Tb, Method 1a, condition b; can withstand 10 seconds at 260°C ± 5°C
Cured, flame-retardant epoxy polymer; meets UL 94V-0
RHEF050 to RHEF400: Tin-plated copper clad steel, 0.205mm
RHEF450 to RHEF1000: Tin-plated copper, 0.52mm
RHEF1300, RHEF1500: Tin-plated copper, 0.82mm
Solderability per ANSI/J-STD 002 Category 3
Per IEC 68-2-20, Test Tb, Method 1a, condition b; can withstand 10 seconds at 260°C ± 5°C
Cured, flame-retardant epoxy polymer; meets UL 94V-0
Conditions
70°C, 1000 hours
85°C, 1000 hours
85°C, 85% RH, 1000 hours
125°C, -40°C (10 times)
MIL-STD-202, Method 215F
File # E74889
File # CA78165C
Certificate number available on request (per IEC 60730-1).
2
2
2
(18 AWG) ø 1.0 mm/0.04 in.
(20 AWG) ø 0.81 mm/0.032 in.
(20 AWG) ø 0.81 mm/0.032 in.
2
2
(18 AWG) ø 1.0 mm/0.04 in.
2
(18 AWG) ø 1.0 mm/0.04 in.
(20 AWG) ø 0.81 mm/0.032 in.
2
(24 AWG) ø 0.51 mm/0.020 in.
2
(24 AWG) ø 0.51 mm/0.020 in.
Resistance Change
± 5%
± 5%
± 5%
± 5%
No change
Resistance Change
± 5%
± 5%
± 5%
± 5%
No change
Raychem Circuit Protection