MCV1206M260AGT MULTICOMP, MCV1206M260AGT Datasheet - Page 7

• Manufacturer Part Number: MCV1206M260AGT
• Description: VARISTOR, 54V, 1206
• Manufacturer: MULTICOMP

Specifications of MCV1206M260AGT

• Suppressor Type: Varistor
• Peak Surge Current @ 8/20µs: 100A
• Varistor Case: 1206
• Clamping Voltage Vc Max: 54V
• Peak Energy (10/1000us): 0.5J
• Voltage Rating Vdc: 26V
• Voltage Rating Vac: 20V
• Rohs Compliant: Yes
• Operating Temperature Range: -55°C To +125°C

Caution of Handling
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for the prevention
of defects, which might directly cause damage to the third party’s life, body or property.
(1) Aircraft equipment.
(2) Aerospace equipment.
(3) Undersea equipment.
(4) Medical equipment.
(5) Traffic signal equipment.
(6) Applications of similar complexity and/or reliability requirements to the applications listed in the above.
Storage Condition
(1) Products should be used in 6 months from the final date of manufacture which can be confirmed.
(2) Storage environment condition.
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011.
Multilayer Chip Varistors
Products should be storage in the warehouse on the following conditions.
Temperature
Humidity
Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of electrode,
resulting in poor solderability.
Products should be storage on the palette for the prevention of the influence from humidity, dust and son on.
Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.
Products should be storage under the airtight packaged condition.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
: -10 to +40°C.
: 30 to 70% relative humidity.
Page <7>
04/05/11 V1.1