646502-1 TE Connectivity, 646502-1 Datasheet - Page 2

• Manufacturer Part Number: 646502-1
• Description: 2MM HM DUST PROTECTOR TYPE A/B
• Manufacturer: TE Connectivity
• Type: Type A, Type Br

Specifications of 646502-1

• Rohs Compliant: YES
• Product Type: Accessories
• Mounting Style: PCB
• Accessory Type: Pin Cover
• Gender: Plug
• Used For: PCB Mount Connectors
• Module Length (mm [in]): 49.23 [1.940]
• Compactpci: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / Rohs Status: Details

3.4.
3.5.
Examination of product.
Termination resistance.
Dielectric withstanding voltage.
Insulation resistance.
Vibration, sinusoidal.
Physical shock.
Rev A
Performance and Test Description
Product is designed to meet electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per IEC 512-1.
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing.
50 milliohms maximum initial.
∆R 5 milliohms maximum.
750 vac at sea level.
10000 megohms minimum initial.
1000 megohms minimum final.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
IEC 512-2-1a.
Visual, dimensional and functional
per applicable quality inspection
plan.
IEC 512-2-2a.
Subject mated contacts assembled
in housing to 20 mv maximum open
circuit at 100 ma maximum.
See Figure 3.
IEC 512-2-4a, Method B.
Test between 2 groups of alternate
contacts of mated samples. Test
between first group and second
group connected to the housing or
mounting plate. Then test between
second group and first group
connected to the housing or
mounting plate.
See Figure 4.
IEC 512-2-3a, Method A.
Test between each termination
being tested and all others
connected together, and between
each termination being tested and
the housing or mounting plate of
mated samples.
IEC 512-4-6d.
Subject mated samples to 10-500-
10 Hz traversed in 6.27 minutes.
5.66 hours in each of 3 mutually
perpendicular planes.
See Figure 5.
IEC 512-4-6c.
Subject mated samples to 50 G's
half-sine shock pulses of 11
milliseconds duration. 5 shocks in
each direction applied along 3
mutually perpendicular planes, 30
total shocks.
See Figure 5.
Procedure
108-1622
2 of 10