1658677-1 TE Connectivity, 1658677-1 Datasheet - Page 3

• Manufacturer Part Number: 1658677-1
• Description: D SUB SHELL, PLUG, SIZE 3, STEEL
• Manufacturer: TE Connectivity
• Series: AMPLIMITE HDP-22r

Specifications of 1658677-1

• Connector Type: High Density D Sub
• Connector Shell Size: 3
• Connector Body Material: Metal
• Body Material: Steel
• Gender: Plug
• Rohs Compliant: Yes
• Product Type: Connector
• Product Series: HDP-22 (Crimp Snap)
• Mating Connector Lock: Without
• Shell Size: 3
• Shell Type: Full Metal Shell
• Grounding Indents: With
• Grade: Standard
• Color: Black
• Shell Material: Steel
• Shield Material: Steel
• Shielded: Yes
• Number Of Positions: 44
• Pre-assembled: No
• Cable Insulation Diameter (mm [in]): 4.19 – 11.56 [0.165 – 0.455]
• Shell Plating: Tin
• Shield Plating: Tin
• Insert Material: Thermoplastic
• Insert Flammability Rating: UL 94V-0
• Cable Diameter (max.) (mm [in]): 11.68 [0.460]
• Preloaded: No
• Contact Size: 22
• Enclosure: With
• Connector Style: Plug
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Bulk
• Packaging Quantity: 100
• For Use With: HDP-22 Series D Sub Connectors

Physical shock.
Mating force.
Unmating force.
Contact insertion force.
Contact retention force.
Contact engaging force.
Contact separating force.
Crimp tensile.
Rev B
Test Description
No discontinuities of 1 microsecond
or longer duration.
See Note.
Note: Ground indents are on the
plug.
Note: Ground indents are on the
plug.
Three pounds maximum per
contact.
Contacts shall not dislodge from the
connector housing.
Eight ounces maximum per contact. TE Spec 109-35.
.75 ounce minimum per contact.
Size Positions
Size Positions
1
2
3
4
5
1
2
3
4
5
Wire Size
(AWG)
22
24
26
28
Figure 1 (continued)
15
26
44
62
78
15
26
44
62
78
Requirement
(lbs minimum)
Crimp Tensile
Ground Indents
Ground Indents
(lbs maximum)
(lbs maximum)
With Without
16.5
23.3
29.3
With Without
16.5
23.3
29.3
5.6
9.8
5.6
9.8
12
4.5
2.7
8
33
38
46
52
58
33
38
46
52
58
TE Spec 109-26-1.
Subject mated specimens to 50 G's
half-sine shock pulses of 11
milliseconds duration. Three shocks
in each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
TE Spec 109-42, Condition A.
Measure force necessary to mate
specimens at a maximum rate of 1
inch per minute using a free-floating
fixture.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
specimens at a maximum rate of 1
inch per minute.
TE Spec 109-41.
Measure force necessary to insert
contact into housing.
TE Spec 109-30.
Apply axial load of 5 pounds to
contacts and hold for 60 seconds.
Measure force necessary to insert
gage A to a depth of .200.
See Figure 5.
TE Spec 109-35.
Size 2 times using gage A, then
measure force necessary to insert
gage B to a depth of .200. Measure
force to separate.
See Figure 5.
TE Spec 109-16.
Determine crimp tensile at a
maximum rate of 1 inch per minute.
Procedure
108-1268
3 of 8