09 67 000 9918 HARTING, 09 67 000 9918 Datasheet - Page 15

• Manufacturer Part Number: 09 67 000 9918
• Description: SLIDE LOCK, DD
• Manufacturer: HARTING

Specifications of 09 67 000 9918

• Connector Shell Size: DD
• Accessory Type: Slide Lock
• D Sub Shell Size: DD
• Rohs Compliant: Yes

D-Sub InduCom
Crimp flange termination instruction
1. Strip the cable sheath to the correct length
2. Place the crimp ferrule over the cable sheath.
3. Place the crimp flange over the wires covered
4. Move the crimp ferrule back onto the crimp
5. Cut off the internal screen foil and push the
HARTING offers to test and define the best
crimp flange and ferrule combination for
customer specific cables.
(approx. 35 to 40 mm, depending on interface
type).
Bend the outer screen backwards over the cable
sheath. Cut screen approx. 2 mm from the end
of the cable sheath.
by the remaining foil shield. Push and twist
the crimp flange under the outer screen and
cable sheath until the end of the cable she-
ath touches the crimp flange. HARTING has
developed a special tool for optimised installation
of the shielding over the crimp flange, part num-
ber 61 03 600 0017.
flange and crimp the two parts together with
the special service crimp tool part number
61 03 600 0020. For an optimised crimp pro-
cess the tool should to be positioned as close
as possible to the crimp flange sholder.
crimp flange inside the metal hood.
Mounting details
07 .
15