1.
1.1.
1.2.
1.3.
2.
2.1.
2.2.
3.
3.1.
3.2.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
Content
This specification covers the performance, tests and quality requirements for TE Connectivity (TE) high
performance modular plugs and jacks designed for printed circuit board mounting.
Qualification
When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be performed using the applicable inspection plan and product drawing.
Qualification Test Results
Successful qualification testing on the subject product line was completed on 31Mar97. The test file
number for this testing is 501-91-2. This documentation is on file at and available from Engineering
Practices and Standards (EPS).
APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of conflict between the
requirements of this specification and the product drawing, the product drawing shall take precedence.
In the event of conflict between the requirements of this specification and the referenced documents,
this specification shall take precedence.
TE Documents
!
!
!
!
!
Reference Documents
!
!
REQUIREMENTS
Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable product
drawing.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
109-1: Test Specification (General Requirements for Test Specifications)
109 Series: Test Specifications as indicated in Figure 1
114-2048: Application Specification (Modular Jacks)
114-6053: Application Specification (High Performance Modular Plug Connectors)
501-91-2: Qualification Test Report (High Performance Modular Plugs & Jacks, PCB Mounted)
108-1163: Product Specification (Modular Plugs, Thru-Hole and Surface Mount Jacks, Data and
Telephone, PCB Mounted)
502-1064: Engineering Report (High Performance PCB Modular Jacks)
| Indicates change
*Trademark
Product
Specification
High Performance Modular Plugs & Jacks, PCB Mounted
For latest revision, visit our website at www.te.com/documents.
For Regional Customer Service, visit our website at www.te.com
Other products, logos, and company names might be trademarks of their respective owners.
108-1163-2
11Mar11 Rev C
1 of 4
LOC B