5223004-2 TE Connectivity, 5223004-2 Datasheet - Page 3

• Manufacturer Part Number: 5223004-2
• Description: HARD METRIC CONNECTOR, RECEPTACLE, 60POS
• Manufacturer: TE Connectivity
• Series: Z-PACKr

Specifications of 5223004-2

• Connector Type: Backplane
• Row Pitch: 2mm
• Pitch Spacing: 2mm
• No. Of Contacts: 60
• Gender: Receptacle
• Contact Termination: Through Hole
• No. Of Rows: 5
• Contact Plating: Gold
• Rohs Compliant: Yes
• Product Type: Connector
• Pcb Mounting Orientation: Right Angle
• Post Type: Solder Post
• Module Type: Signal
• Voltage Rating (vac): 30
• Termination Post Length (mm [in]): 2.73 [0.107]
• Number Of Signal Positions: 60
• Sequencing: No
• Number Of Rows: 5
• Post Plating: Tin
• Centerline, Matrix (mm [in]): 2.00 x 2.00 [.079 x .079]
• Contact Type: Socket
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Receptacle
• Housing Material: Liquid Crystal Polymer (LCP)
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application: Free-Board
• Lead Free Status / Rohs Status: Details

Rev C
Vibration, sinusoidal.
Physical shock.
Durability.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Test Description
No discontinuities of 1
microsecond or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
Signal modules:
0.70 Newtons maximum per
contact.
Power modules:
2.40 Newtons maximum per
contact.
Signal modules:
0.12 Newton minimum per contact.
Power modules:
0.30 Newton minimum per contact.
See Note.
See Note.
Figure 2 (continued)
ENVIRONMENTAL
MECHANICAL
Requirement
TE Spec 109-21-4.
Subject mated samples to
frequency range of 10-2000-10 Hz
and amplitude of 0.06 inch or 20
G’s. 12 cycles.
See Figure 6.
TE Spec 109-26-1.
Subject mated samples to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 6.
TE Spec 109-27.
Mate and unmate samples for 250
cycles (100 cycles for right angle
headers) at maximum rate of 100
cycles per hour with 30 second rest
in unmated condition.
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples at maximum rate of .5
inch per minute.
TE Spec 109-42, Condition A.
Measure force necessary to
unmate samples at maximum rate
of .5 inch per minute.
TE Spec 109-22.
Subject unmated samples to 5
cycles between -55 and 125° C.
TE Spec 109-23-3, Condition B.
Subject unmated samples to 10
cycles between 25 and 65° C at
95% RH.
Procedure
108-1441
3 of 8