1-215083-8 TE Connectivity, 1-215083-8 Datasheet - Page 93

• Manufacturer Part Number: 1-215083-8
• Description: CONNECTOR, 18WAY, AWG28, 1.27
• Manufacturer: TE Connectivity
• Series: Micro-MaTchr

Specifications of 1-215083-8

• Connector Type: Wire-to-Board
• Contact Material: Phosphor Bronze
• Contact Plating: Tin
• Gender: Plug
• Lead Spacing: 1.27mm
• No. Of Rows: 2
• No. Of Ways: 18
• Rohs Compliant: Yes
• Product Type: Plugs - Housings
• Contact Gender: Pin (Male)
• Pitch: 1.27 mm
• Number Of Positions / Contacts: 18
• Mounting Style: Cable
• Mounting Angle: Vertical
• Termination Style: IDC
• Housing Material: Thermoplastic Polyester
• Current Rating: 1.5 A
• Type Of Connector: Male-On-Wire
• Wire/cable Type: Ribbon Cable
• Insulation Diameter (mm [in]): 0.90 [.035]
• Polarization: Without
• Number Of Positions: 18
• Wire Range (mm [awg]): 0.08-0.09² [28]
• Centerline (mm [in]): 1.27 [0.050]
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Tin
• Housing Color: Red
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Cable
• Packaging Method: Reel
• Packaging Quantity: 2,500
• Lead Free Status / Rohs Status: Details

1. Place pinless header
2. With bottom of pc board
3. Apply an even, centered
over preinstalled posts
so that post tips start
into header cavities.
supported, place steel
block over header. Steel
block must be wider and
longer than header so
that it covers all four sides
of the header. However,
for headers with latches
pre-assembled, the steel
block must not interfere
with the latches.
force on steel block until
header bottoms on pc
board. If posts are
longer than .545 [13.84],
they may be forced
against the steel block
before the header is fully
seated. In this situation,
extreme caution must be
taken so that posts are
not damaged or pushed
out of the pc board.
93