556879-2 TE Connectivity, 556879-2 Datasheet - Page 3

• Manufacturer Part Number: 556879-2
• Description: Plug And Socket Connector Housing
• Manufacturer: TE Connectivity
• Series: AMPINNERGYr

Specifications of 556879-2

• No. Of Positions: 2
• Pitch Spacing: 11.18mm
• Connector Type: Plug & Socket
• Connector Mounting: Cable
• No. Of Contacts: 2
• Gender: Plug
• Color: Black
• Rohs Compliant: Yes
• Product Type: Housings
• Contact Gender: Pin (Male)
• Number Of Positions / Contacts: 2
• Mounting Style: In Line
• Termination Style: Wire
• Housing Material: Polycarbonate
• Make First / Break Last: Yes
• Pcb Mount Retention: Without
• Sealed: No
• Ul File Number: E28476
• Csa File Number: LR 7189
• Panel Mount Retention: Without
• Mating Retention Type: Latching
• Vde Tested: No
• Contact - Rated Current (a): 35
• Operating Voltage Reference: AC
• Operating Voltage (vac): 600
• Wire/cable Size (awg): 10 – 18
• Wire/cable Size (mm²): 0.811 – 6.11
• Wire/cable Size (cma): 1,600.53 – 12,066.13
• Profile Height (y-axis) (mm [in]): 9.40 [0.370]
• Mating Retention: With
• Number Of Positions: 2
• Centerline (mm [in]): 11.18 [0.440]
• Number Of Rows: 1
• Length (x-axis) (mm [in]): 30.48 [1.200]
• Width (z-axis) (mm [in]): 36.58 [1.440]
• Connector Style: Plug
• Housing Color: Black
• Mating Alignment: With
• Mating Alignment Type: Polarization
• Ul Flammability Rating: UL 94V-0
• Custom Configurable: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 600
• Csa Certified: Yes
• Operating Temperature (°c [°f]): 0 – 105 [32 – 221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 1.016 – 25.908 [0.040 – 1.020]
• Application Use: Wire-to-Board
• Contact Transmits (typical Application): Power
• Packaging Method: Loose Piece
• For Use With: AMPINNERGY Connectors
• Lead Free Status / Rohs Status: Details

Rev A
Durability.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
See Note.
6 pounds maximum average per
contact.
1 pound minimum average per
contact.
6 pounds maximum average per
contact.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-27.
Mate and unmate samples for 100
cycles at a maximum rate of 500
cycles per hour.
TE Spec 109-42,
Condition A.
Measure force necessary to mate
samples at a maximum rate of 1
inch per minute.
TE Spec 109-42,
Condition A.
Measure force necessary to
unmate samples at a maximum
rate of 1 inch per minute.
TE Spec 109-22.
Subject mated samples to 10
cycles between 0 and 105° C.
TE Spec 109-23-3, Condition B.
Subject mated samples to 10
cycles between 25 and 65° C at
95% RH.
TE Spec 109-43.
Subject mated samples to
temperature life at 118° C for 792
hours.
Procedure
108-1349
3 of 7