SLCF064JIU STEC, SLCF064JIU Datasheet - Page 43

• Manufacturer Part Number: SLCF064JIU
• Manufacturer: STEC
• Type: CompactFlashr

Specifications of SLCF064JIU

• Density: 64MByte
• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: Not Required
• Mounting: Socket
• Pin Count: 50
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 3.18/4.75V
• Operating Supply Voltage (max): 3.465/5.25V
• Programmable: Yes
• Lead Free Status / Rohs Status: Compliant

SimpleTech P/N:
(where U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device)
REVISION HISTORY
Rev.
-301 5/26/04. Initial Release.
-302 7/1/04. Features bullets on page 1 updated. Pin
-303 7/9/04. Endurance increased from 300,000 cycles min
-304 7/22/04. “up to” added to sustained read and write
SimpleTech Inc. reserves the right to make changes to specifications and product descriptions such as but not limited to numbers, parameters
and other technical information contained herein without notice. Contact SimpleTech Inc. sales office to obtain the latest specifications.
SimpleTech Inc. grants no warranty with respect to this Data Sheet, neither explicit nor implied, and it is not liable for direct or indirect
damages. Some States do not grant the exclusion of incidental damages and as such this statement may not be valid in such states. The
provisions of this Data Sheet do not convey to the purchaser of the device any license under any patent rights or other intellectual property
rights of SimpleTech Inc. or others.
Change Description from Previous Revision
Assignments for IDE Mode corrected to indicate which
pins are not used in IDE Mode. Pinout of the PC Card
to CF Adapter corrected to call out DASP and -PDIAG.
Pin Description changes: -CD1 and -CD2 not used in
IDE mode; -IOIS16 not used in IDE mode; -WAIT
description corrected to not used by card and pulled
up by 4.7K ohm resistor. Performance rates for read
and write described as sustained read and sustained
write. AC Characteristics VCC 3.3V operating
tolerances restated as +5% and -3.6% tolerances.
Error register bit 0 Function “not supported” phrase
removed. DMA commands removed (paper only error
indicated that DMA was supported). Identify Drive
Information table updated to reflect DMA not
supported. “-F” p/n suffix selection added to notes of
the Ordering Information. ATA-4 compatiblility added to
Features. DC Characterists Sleep Mode values
changed from 80uA to 800uA for 3.3V power supply,
and 120uA to 1200uA for 5V power supply.
to 2 million cycles min.
data rate performance.
SLCF064J(U)(I)-(F)
Document Part Number 61000-02805-310 July 2005
-305 8/23/04. Definition for Serial #, Firmware Rev., and
-306 10/14/04. Standard ECC, Endurance, and Warranty
-307 1/31/05. Write speed updated to “up to 1.5MB/s” from
-308 2/16/05. Shock parameter of 11ms corrected to 0.330
-309 4/22/05. This rev of the spec has MWDMA support.
-310 7/20/05. Separate shock and vibration for U option
Model # in the Identify Drive Information table added
in callout. Words 0, 4-5, 20-21, 49, 63 corrected in
Drive ID table.
bullets added to Features on page 1.
3.4MB/s.
to 0.750ms. 3/8/05. Humidity parameter changed to
95% from 85%. 3/14/05. CHS values updated.
4/22/05. U option added.
7/20/05. For higher revs of this spec, the MWDMA
support has been removed. Product with MWDMA
has been given a P/N of SLCF064J2(U)(I)-(F).
added. Right-side Notch on Type I dimension
illustration (optional on CFA specifications) removed
from drawing (paper error only).
COMPACTFLASH
Page 43