D82JCTUSWREF Intel, D82JCTUSWREF Datasheet - Page 9

• Manufacturer Part Number: D82JCTUSWREF
• Manufacturer: Intel

Specifications of D82JCTUSWREF

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Hardware System Requirements
Software System Requirements
The computer containing the D/82JCT-U board must run on one of the following:
Additional Components
Item Market Name
D82JCTU
D82JCTUPCIUNIV
D82UCABLE
CABLED82U
CBLCTB68C4DROP
CBLCTB68C8DROP
The D/82JCT-U board occupies a single expansion slot, and up to eight boards can be configured in a
system. The maximum number of ports supported is 64, dependent on the application, the amount of
disk I/O required, and the host computer’s CPU.
An eight-port system requires a minimum 90 MHz computer with Pentium processor, Celeron
or equivalent, with an available PCI bus slot.
A 64-port system requires a minimum 266 MHz computer with Pentium processor, Celeron processor,
or equivalent, with an available PCI bus slot.
Linux operating system
Windows NT operating system
Windows 2000 operating system
Comments
Board can be used in the US, Canada, Europe (CE) and supports all of the PBXs listed in
this datasheet and supports only +5 V PCI expansion slots.
Board can be used in the US, Canada, Europe (CE) and supports all of the PBXs listed in
this datasheet. Similar to D82JCTU, this universal PCI form factor board supports both
+5 V and +3.3 V PCI expansion slots. (Note: To use this board, you must upgrade to
System Release 5.1 or higher software.)
Required for production environments. Order one cable for each board. (Note: This cable
SKU works on D82JCTU, D82JCTUPCIUNIV, or D42JCTU.)
Optional kit for use in engineering labs only. (Note: This cable works on D82JCTU,
D82JCTUPCIUNIV, or D42JCTU.)
Connects up to four H.100 connector-equipped boards together, such as D82JCTU and
D82JCTUPCIUNIV. Required only if H.100 switching will be used by the application to
switch voice or fax resources from one board to another in the system.
Connects up to eight H.100 connector-equipped boards together such as D82JCTU and
D82JCTUPCIUNIV. Required only if H.100 switching will be used by the application to
switch voice or fax resources from one board to another in the system.
Intel
®
Dialogic
®
D/82JCT-U PBX Integration Board
®
processor,
Datasheet
9