E2CY-V3A Omron, E2CY-V3A Datasheet - Page 3

• Manufacturer Part Number: E2CY-V3A
• Description: Proximity Sensors NON-FERROUS PROX HEA D FLAT
• Manufacturer: Omron
• Series: E2CYr

Specifications of E2CY-V3A

• Output Type: NPN
• Proximity Sensor Sensing Distance: 3mm
• Proximity Sensor Sensing Distance Range: 2 to 7mm
• Mounting: Panel
• Operating Temp Range: -10C to 55C
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 10V
• Operating Supply Voltage (typ): 12/15/18/24V
• Operating Supply Voltage (max): 30V
• Pin Count: 3
• Maximum Operating Temperature: + 55 C
• Operating Supply Voltage: 10 V to 30 V
• Sensing Distance: 3 mm
• Minimum Operating Temperature: - 10 C
• Sensor Type: Inductive
• Sensing Object: Metallic
• Response Frequency: -
• Material - Body: Zinc Die-Cast
• Shielding: Shielded
• Voltage - Supply: -
• Terminal Type: 3-Wire
• Package / Case: Box
• Lead Free Status / Rohs Status: Supplier Unconfirmed

Operation
J OUTPUT CIRCUIT
J SENSITIVITY ADJUSTMENTS
Sensitivity adjustment is performed with or without a target object by setting the Sensor to the maximum sensing distance. The distance
can be set by using any of the following four methods.
Types of Sensing Adjustments and Applications
Note: All teaching methods can eliminate the influence of surrounding metal objects.
E2CY
No.
1
2
3
4
Main
circuit
Distance adjustment method
Teaching without sensing object
Teaching with or without the sensing
object
Positioning teaching
The distance is adjusted automatically
39 V
39 V
Brown
Black
Control output
Blue
Orange
Load
12 to 24 VDC
Self-diagnostic output:
100 mA max.
100 mA max.
0 V
Application
The E2CY is used as a normal proximity sensor.
•
•
•
•
•
The E2CY is used as a normal proximity sensor.
The E2CY is used for detecting the difference in target object level.
The E2CY is used for discriminating types of target objects.
The E2CY is used for discriminating the distance between the
sensing surface and target objects located within a certain range.
Object positioning is required.
The designation of sensor-ON point is required.
Operation mode
selector
T
AUTO
E2CY
3