ST7MDT2-DVP2/UK STMicroelectronics, ST7MDT2-DVP2/UK Datasheet - Page 35

• Manufacturer Part Number: ST7MDT2-DVP2/UK
• Manufacturer: STMicroelectronics

Specifications of ST7MDT2-DVP2/UK

• Lead Free Status / Rohs Status: Compliant

ST7MDT2-DVP2 User Manual
5
Memory zone types
The left column of the memory configuration window indicates the address
range of each memory zone. The right column indicates the memory type of each
zone. Depending on your target MCU, the available memory types may be:
Peripherals, RAM, ROM, Stack, System, EEPROM, Reserved, Vectors,
Application. Some of these zones can have their type and size modified, others
cannot be modified. Their definitions and properties are explained as follows:
Configuring the MCU Memory. The default memory settings depend on the
MCU selected. However, you can configure the memory settings as you wish if
your application requires non-default settings. This feature would enable you,
for instance, to temporarily increase the ROM size during the development
phase of your application.
There are two methods for configuring the memory settings on the MCU: by
typing in the start and stop addresses of each memory zone into the memory
configuration window, and by graphically moving the memory zone
boundaries in the graphic memory configuration viewer (see
more instruction).
Memory
configuration fields
Graphic memory
configuration viewer
page 36
3 - STVD7
35/82
for