GXL-8FB Panasonic Electric Works, GXL-8FB Datasheet - Page 11

• Manufacturer Part Number: GXL-8FB
• Manufacturer: Panasonic Electric Works

Specifications of GXL-8FB

• Proximity Sensor Type: Inductive
• Output Type: NPN
• Proximity Sensor Sensing Distance: 2.5mm
• Proximity Sensor Sensing Distance Range: 2 to 7mm
• Proximity Sensor Switching Mode: NC
• Mounting: Screw
• Operating Temp Range: -25C to 70C
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 12V
• Operating Supply Voltage (typ): 15/18V
• Operating Supply Voltage (max): 24V
• Lead Free Status / Rohs Status: Supplier Unconfirmed

GXL
PRECAUTIONS FOR PROPER USE
Mounting
<
(
566
GXL-8 (DC 2-wire) type
The tightening torque should
GXL-8 (NPN output) type
The tightening torque should
GXL-N12 type
be 0.5 N m or less.
To mount the sensor with a nut,
the thru-hole diameter should be
"3.4 mm
attached mounting screw and
nut, take care that the thickness
of the mounting plate should be
2.3 mm
If a screw other than the
attached screw is used, make
sure to use a M3 truss head
screw.
be 0.5 N m or less.
To mount the sensor with a nut,
the thru-hole diameter should
be "3 mm
attached mounting screw and
nut, take care that the thickness
of the mounting plate should be
2.3 mm
If a screw other than the
attached screw is used, make
sure to use a M2.6 truss head
screw.
Do not use a flat head screw
or a pan head screw.
Note: Do not use a M3 screw.
One point fixing
The tightening torque should be 0.49 N m or less.
To mount the sensor with a nut, the thru-hole diameter
should be "3.4 mm
All models
This product is not a safety sensor. Its use is not
intended or designed to protect life and prevent body
injury or property damage from dangerous parts of
machinery. It is a normal object detection sensor.
0.091 in
0.091 in
"0.134
"0.118
>
or less.
or less.
in. With the
in. With the
"0.134
in.
)
<
Two point fixing
>
08/2005
Influence of surrounding metal
Note: The GXL-15FLU type should be mounted on an insulator or a non-
Note: When GXL-15HLU / GXL-15HL type is mounted on an insulator or a
GXL-15 type
Front sensing type
Top sensing type
The tightening torque should
To mount the sensor with the
When there is a metal near the sensor, keep the minimum
be 1 N m or less.
optional sensor mounting bracket
MS-GXL15, the thru-hole diameter
should be "3.4 mm
Screw, nut or washers are not
supplied. Please arrange them
separately.
To mount the long sensing range
GXL-15 type on a magnetic body,
such as iron, the enclosed
aluminum sheet, or any other
aluminum sheet having a minimum
size of 30
1.181
(GXL-15HLU
30 30
t 0.012
between the sensor and the
magnetic body.
However, it is not necessary to use
the aluminum sheet when
mounting on a non-magnetic body,
such as, aluminum or an insulator.
When mounting the inductive
proximity sensor with the optional
sensor
MS-GXL15-2, if the bracket is
mounted close to the sensing part,
the bracket itself gets sensed and
the operation becomes unstable.
Make sure to mount such that the
mounting holes of the sensor and
those of the mounting bracket are
in one horizontal straight line.
separation distance specified below.
A
B
C
D
E
G
F
magnetic body. To mount it on a magnetic body, such as iron, use the
enclosed aluminum sheet.
non-magnetic body, or seated on the enclosed aluminum sheet, the
distance ‘F’ can be zero.
7 mm
8 mm
3 mm
GXL-8F type
0
10 mm
0
0
GXL-8H type
4 mm
3 mm
3 mm
in), should be inserted
0.276 in
0.315 in
0.118 in
1.555
t 0.3 mm
mounting
0.157 in
0.394 in
0.118 in
0.118 in
39.5
/ GXL-15HL :
1.181 1.181
GXL-N12F type GXL-15FU / GXL-15F type GXL-15FLU type
07 mm
20 mm
10 mm
t 0.012 in
"0.134
t 0.3 mm
GXL-15HU / GXL-15H type GXL-15HLU / GXL-15HL type
bracket
0.276 in
0.787 in
0.394 in
0
20 mm
0
0
6 mm
3 mm
0 mm
in.
0.236 in
0.787 in
0.118 in
08 mm
20 mm
07 mm
0 in
0.315 in
0.787 in
0.276 in
10 mm
12 mm
30 mm
10 mm
8 mm
30 mm
10 mm
0.394 in
0.315 in
0.472 in
1.181 in
0.394 in
1.181 in
0.394 in
(Note)
(Note)