NL6448BC33-64E NEC Electronics, NL6448BC33-64E Datasheet - Page 26

• Manufacturer Part Number: NL6448BC33-64E
• Manufacturer: NEC Electronics

Specifications of NL6448BC33-64E

• Lead Free Status / Rohs Status: Compliant

6. PRECAUTIONS
6.1 MEANING OF CAUTION SIGNS
6.2 CAUTIONS
6.3 ATTENTIONS
6.3.1 Handling of the product
"6.3 ATTENTIONS", after understanding these contents!
① Take hold of both ends without touching the circuit board when the product (LCD module) is picked
② Do not hook nor pull cables such as lamp cable, and so on, in order to avoid any damage.
③ When the product is put on the table temporarily, display surface must be placed downward.
④ When handling the product, take the measures of electrostatic discharge with such as earth band,
⑤ The torque for product mounting screws must never exceed 0.294N⋅m. Higher torque might result in
⑥ The product must be installed using mounting holes without undue stress such as bends or twist (See
⑦ Do not press or rub on the sensitive product surface. When cleaning the product surface, use of the
⑧ Do not push nor pull the interface connectors while the product is working.
⑨ Do not bend or unbend the lamp cable at the near part of the lamp holding rubber, to avoid the
The following caution signs have very important meaning. Be sure to read "6.2 CAUTIONS" and
∗ Do not touch the working backlight. There is a danger of an electric shock.
∗ Do not touch the working backlight. There is a danger of burn injury.
∗ Do not shock and press the LCD panel and the backlight! There is a danger of breaking,
up from inner packing box to avoid broken down or misadjustment, because of stress to mounting
parts on the circuit board.
ionic shower and so on, because the product may be damaged by electrostatic.
distortion of the bezel.
outline drawings). And do not add undue stress to any portion (such as bezel flat area). Bends or
twist described above and undue stress to any portion may cause display mura.
cloth with ethanolic liquid such as screen cleaner for LCD is recommended.
damage for high voltage side of the lamp.
!
because they are made of glass. (Shock: To be not greater 539m/s
11ms, Pressure: To be not greater 19.6 N (φ16mm jig))
sustain a damage, if customer has wrong operations.
wrong operations.
wrong operations.
This sign has the meaning that customer will be injured by himself or the product will
This sign has the meaning that customer will get an electrical shock, if customer has
This sign has the meaning that customer will be injured by himself, if customer has
!
DATA SHEET DOD-PP-0163 (1st edition)
2
and to be not greater
NL6448BC33-64E
26