NL3224AC35-01 NEC Electronics, NL3224AC35-01 Datasheet - Page 21

• Manufacturer Part Number: NL3224AC35-01
• Manufacturer: NEC Electronics

Specifications of NL3224AC35-01

• Lead Free Status / Rohs Status: Not Compliant

GENERAL CAUTIONS
(1) Caution when taking out the module
(2) Cautions for handling the module
(3) Cautions for the atmosphere
(4) Caution for the module characteristics
Next figures and sentence are very important, Please understand these contents as follows.
a) Pick the pouch only, when taking out the module from a slipping box.
a) As the electrostatic discharges may break the LCD module, handle the LCD module with care against
b)
c) As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning.
d) Do not pull the interface connectors in or out while the LCD module is operating.
e) Put the module display side down on a flat horizontal plane.
f) Handle connectors and cables with care.
g) When the module is operating, do not lose EXTCLK, HS, or VS signal. If any one of these signals is lost,
a) Dew drop atmosphere should be avoided.
b) Do not store and/or operate the LCD module in a high temperature and/or high humidity atmosphere. Storage
c) This module uses a cold cathod fluorescent lamp. Therefore, the life time of the lamp becomes short
d) Do not operate the LCD module in high magnetic field.
a) Do not apply the fixed patterns data signal to the LCD module at product aging. In order to avoid image
electrostatic discharges.
the LCD panel would be damaged.
in an Electro-conductive Polymer Packing Pouch and under relatively low temperature atmosphere is
recommended.
conspicuously at low temperature.
sticking, do not display with fixed pattern. Periodic change of display pattern is recommended.
Do not touch an inverter, on which is stuck a caution label··· while the LCD module is under the operation,
because of dangerous high voltage.
CAUTION
CAUTION
This figure is a mark that you will get an electric shock when you make a mistake to operate.
This figure is a mark that you will get hurt when you make a mistake to operate
As the LCD panel and backlight element are made from fragile glass material, impulse and pressure
to the LCD module should be avoided.
This figure is a mark that you will get hurt and/or the module will have damages when
you make a mistake to operate.
Data Sheet EN0495EJ1V1DS00
NL3224AC35-01, 13
21