HFBR-5760AL Avago Technologies US Inc., HFBR-5760AL Datasheet - Page 4

• Manufacturer Part Number: HFBR-5760AL
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-5760AL

• Optical Fiber Type: TX/RX
• Optical Rise Time: 3/2.2ns
• Optical Fall Time: 3/2.2ns
• Operating Temperature Classification: Industrial
• Peak Wavelength: 1308nm
• Package Type: SFP
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.63V
• Output Current: 50mA
• Operating Temp Range: -40C to 85C
• Mounting: Snap Fit To Panel
• Pin Count: 20
• Lead Free Status / Rohs Status: Not Compliant

Eye Safety
These transceivers provide Class 1 eye safety by design.
Avago Technologies has tested the transceiver design
for compliance with the requirements listed in Table 1
under normal operating conditions and under a single
fault condition.
Flammability
The HFBR-5760L transceiver housing is made of metal
and high strength, heat resistant, chemically resistant,
and UL 94V-0 flame retardant plastic.
Table 1. Regulatory Compliance
4
Feature
Electrostatic Discharge
(ESD) to the Electrical Pins
Electrostatic Discharge
(ESD) to the Duplex LC
Receptacle
Electromagnetic
Interference (EMI)
Immunity
Eye Safety
Test Method
MIL-STD-883C
Variation of
IEC 61000-4-2
FCC Class B
CENELEC CEN55022
Class B (CISPR 21)
VCCI Class 1
Variation of
IEC 61000-4-3
AEL Class 1
EN60825-1 (+A11)
Performance
Meets Class 2 (2000 to 3999 Volts).
Withstand up to 2200 V applied between electrical pins.
Typically withstand at least 25 kV without damage when the LC con-
nector receptacle is contacted by a Human Body Model probe.
System margins are dependent on customer board and chassis
design.
Typically shows a negligible effect from a 10 V/m field swept from 80
to 450 MHz applied to the transceiver without a chassis enclosure.
Compliant per Avago Technologies’ testing under single fault condi-
tions.
TUV Certification: 09771332.013
Shipping Container
The transceiver is packaged in a shipping container de-
signed to protect it from mechanical and ESD damage
during shipment or storage.