BOXDP965LTCK Intel, BOXDP965LTCK Datasheet - Page 38

• Manufacturer Part Number: BOXDP965LTCK
• Manufacturer: Intel

Specifications of BOXDP965LTCK

• Lead Free Status / Rohs Status: Compliant

Intel Desktop Board DP965LT Technical Product Specification
1.10.1.3
1.10.2
38
Newer energy-efficient power supplies using less than 0.5 W (in Standby mode) may
also be needed to achieve this goal.
Table 9 lists the devices or specific events that can wake the computer from specific
states.
Table 9. Wake-up Devices and Events
Note: For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.
CAUTION
Ensure that the power supply provides adequate +5 V standby current if LAN wake
capabilities and Instantly Available PC technology features are used. Failure to do so
can damage the power supply. The total amount of standby current required depends
on the wake devices supported and manufacturing options.
The board provides several power management hardware features, including:
•
•
•
•
•
•
•
•
•
These devices/events can wake up the computer…
LAN
PME# signal
Power switch
PS/2 devices
RTC alarm
Serial port
USB
WAKE# signal
Power connector
Fan headers
LAN wake capabilities
Instantly Available PC technology
Resume on Ring
Wake from USB
Wake from PS/2 keyboard
PME# signal wake-up support
WAKE# signal wake-up support
Power On will enable a wake-up event from LAN in the S5 state.
Wake-up Devices and Events
Hardware Support
…from this state
S3, S4, S5
S3, S4, S5
S3, S4, S5
S3
S3, S4, S5
S3
S3
S3, S4, S5
(Note)
(Note)