PS9613L-A CALIFORNIA EASTERN LABS, PS9613L-A Datasheet - Page 12
![no-image](/images/manufacturer_photos/0/1/119/california_eastern_labs_sml.jpg)
PS9613L-A
Manufacturer Part Number
PS9613L-A
Description
Manufacturer
CALIFORNIA EASTERN LABS
Datasheet
1.PS9613L-A.pdf
(13 pages)
Specifications of PS9613L-A
Number Of Elements
1
Input Type
DC
Output Type
Open Collector
Baud Rate
1000Kbps
Forward Voltage
2.1V
Forward Current
25mA
Output Current
15mA
Isolation Voltage
5000Vrms
Package Type
PDIP SMD
Operating Temp Range
-40C to 100C
Current Transfer Ratio
110%
Power Dissipation
100mW
Propagation Delay Time
750ns
Pin Count
8
Mounting
Surface Mount
Reverse Breakdown Voltage
3V
Operating Temperature Classification
Industrial
Lead Free Status / Rohs Status
Compliant
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Cautions
2. Cautions regarding noise
12
collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Fluxes
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10073EJ02V0DS
180˚C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
260˚C MAX.
220˚C
PS9613,PS9613L