BLKD865PERLK Intel, BLKD865PERLK Datasheet - Page 34

• Manufacturer Part Number: BLKD865PERLK
• Manufacturer: Intel

Specifications of BLKD865PERLK

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Intel Desktop Board D865PERL Technical Product Specification
1.10 Audio Subsystem
1.10.1 6-Channel Audio Subsystem (Optional)
✏
34
The Desktop Board D865PERL includes one of the following:
•
•
Both audio subsystems feature:
•
•
•
The audio subsystem includes the following:
•
•
•
The subsystem includes the following connectors.
•
•
•
•
•
NOTE
Powered speakers are required.
6-channel audio subsystem based on the Analog Devices AD1985 codec (described on
page 34)
Flex 6 audio subsystem based on the Analog Devices AD1985 codec (described on page 36)
Advanced jack sense with Auto Topology Switching that enables the audio codec to recognize
what device is connected to an audio port and alerts the user if the wrong type of device has
been connected
Split digital/analog architecture for improved S/N (signal-to-noise) ratio: > 94 dB
Power management support for ACPI 2.0 (driver dependent)
Intel 82801EB I/O Controller Hub (ICH5)
Analog Devices AD1985 audio codec
Microphone input that supports either of the following:
 A single dynamic, condenser, or electret microphone
 Dual microphones for use with voice recognition software
Front panel analog audio connector that can be used as a connector for routing the following
signals to the front panel or used as a jumper block for routing the signals to the back panel
(see page 74 for more information). The connector/jumper block includes pins for:
 Front left and right out
 Mic in
Back panel analog audio connectors:
 Front left and right out
 Center and Low Frequency Effects (LFE) out
 Rear left and right out
 Line in
 Mic in
Back panel coaxial S/PDIF (RCA) connector
Back panel optical S/PDIF (Toslink) connector
ATAPI-style CD-ROM connector