PS710AL-1A CALIFORNIA EASTERN LABS, PS710AL-1A Datasheet - Page 10

• Manufacturer Part Number: PS710AL-1A
• Manufacturer: CALIFORNIA EASTERN LABS

Specifications of PS710AL-1A

• Input Type: DC
• Output Type: AC/DC
• Input Voltage (max): 1.4V
• Output Voltage (max): 60V
• Input Current (max): 50mA
• Output Current: 1.8A
• Isolation Voltage: 1.5kV
• Circuit Arrangement: 1 Form A
• Package Type: PDIP SMD
• Output Device: MOSFET
• Pin Count: 6
• Mounting: Surface Mount
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Rad Hardened: No
• Lead Free Status / Rohs Status: Not Compliant

(1) Infrared reflow soldering
(2) Wave soldering
(3) Cautions
10
RECOMMENDED SOLDERING CONDITIONS
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10268EJ01V0DS
180˚C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
PS710A-1A,PS710AL-1A
260˚C MAX.
220˚C