0638604070 Molex Inc, 0638604070 Datasheet - Page 5

• Manufacturer Part Number: 0638604070
• Description: TOOL KIT
• Manufacturer: Molex Inc

Specifications of 0638604070

• Lead Free Status / Rohs Status: RoHS Not Applicable

63860-4000 Fine Adjust Applicator
Doc No. 63860-4000 Release Date: 05-04-00
Revision: C
NOTES
1. Molex recommends an extra perishable tooling kit be maintained at your facility.
2. Verify tooling alignment by manually cycling the press and Applicator before crimping under power. Check that all
3. Slugs, Terminals, Dirt and Oil should be kept clear of work area.
4. Wear safety glasses at all times.
5. For recommended maintenance refer to the FineAdjust Manual.
screws are tight.
CAUTION: This applicator should only be used in a press with a shut height of 135.8 mm (5.346”). Tooling
damage could result at a lower setting.
CAUTION: To prevent injury never operate this Applicator without the guards supplied with the press or
wire-processing machine in place. Reference the press or wire processing manufacturer’s instruction
manual.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals, applicators and
tooling.
Revision Date: 01-26-04
Visit our Web site at http://www.molex.com
Molex Application Tooling Group
Fax: [phone]
Naperville, IL 60563
Tel: [phone]
1150 E. Diehl Road
UNCONTROLLED COPY
Page 5 of 5