EEEFPC221XAP Panasonic, EEEFPC221XAP Datasheet - Page 14

• Manufacturer Part Number: EEEFPC221XAP
• Description: CAP 220UF 16V ELECT FP SMD
• Manufacturer: Panasonic

No
10 Solvent
11 Damp Heat
7 Vibration
8 Solderability
9 Resistance to
Soldering heat
Resistance of
the Marking
(steady state)
Item
V type FP series
Panasonic Electronic Devices Co., Ltd.
Capacitance :
Appearance :
Capacitance Change :
More than 95% of the terminal surface
shall be covered with new solder.
Leakage Current :
Capacitance Change :
Tangent of Loss Angle (tanδ) :
Appearance :
There shall be no damage end legibly
marked. Marking can be deciphered easily. Test Temperature : 20℃～25℃
Leakage Current :
Capacitance Change :
Tangent of Loss Angle (tanδ) :
Appearance :
Product Specification
During test, measured value shall be
stabilized.(Measured several times
within 30 min. before completion of
test)
No significant change can be observed.
Within ±5% of initial measured value.
Exclude the cross-section of
cutting lead edge.
≦the value of item 7.1.
Within ±10% of initial measured value.
≦the value of item 7.3.
No significant change can be observed.
≦the value of item 7.1.
Within ±20% of initial measured value.
≦120% the value of item 7.3.
No significant change can be observed.
Performance Characteristics
(High. temp. Pb free reflow type)
Frequency : 10Hz～55Hz (1 minute per cycle.)
Total amplitudes : 1.5 mm
Direction and duration of vibration :
Solder Type : H60A,H60S,or H63A(JIS Z3282)
Solder Temperature : 235℃±5℃
Immersing Ｔime : 2s±0.5s
Immersing Depth : Dip the terminals for Approx.
Flux : Approx 25% rosin(JIS K5902) in
After reflow soldering (item 9)
The capacitor shall be left at room temperature
for before measurement.
Class of Reagent : Isopropyl Alcohol
Immersing time : 30s±5s
Test Temperature : 40℃±2℃
Relative Humidity : 90%～95%
Test Duration : 240hours±8hours
be left for 2 hours at room temperature and
room humidity prior to the measurement.
After subjected to the test, the capacitors shall
It is done in the X,Y,Z axis direction for 2
hours each, with a total of 6 hours.
Ethanol(JIS K8101)
0.5mm～1mm thick
Test
CE-VFP4-CE-0-3
11