AD5380BST-3-REEL Analog Devices Inc, AD5380BST-3-REEL Datasheet - Page 37

• Manufacturer Part Number: AD5380BST-3-REEL
• Description: IC DAC 14BIT I2C 40CH 100-LQFP
• Manufacturer: Analog Devices Inc

Specifications of AD5380BST-3-REEL

• Rohs Status: RoHS non-compliant
• Design Resources: 40 Channels of Programmable Voltage with Excellent Temperature Drift Performance Using AD5380 (CN0007) Output Channel Monitoring Using AD5380 (CN0008)
• Settling Time: 6µs
• Number Of Bits: 14
• Data Interface: I²C, Parallel, Serial
• Number Of Converters: 40
• Voltage Supply Source: Single Supply
• Power Dissipation (max): 125mW
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• For Use With: EVAL-AD5380EB - BOARD EVAL FOR AD5380

UTILIZING THE AD5380 FIFO
The AD5380 FIFO mode optimizes total system update rates
in applications where a large number of channels need to be
updated. FIFO mode is only available when parallel interface
mode is selected. The FIFO EN pin is used to enable the FIFO.
The status of FIFO EN is sampled during the initialization
sequence. Therefore, the FIFO status can only be changed by
resetting the device. In a telescope that provides for the cancella-
tion of atmospheric distortion, for example, a large number of
channels need to be updated in a short period of time.
FIFO DATA LOAD
CHNLS 0–39
GROUP A
GROUP A
1.6μs
14.4μs
CHNLS 40–79
GROUP B
1.6μs
14.4μs
FIFO DATA LOAD
TIME FOR GROUP A
OUTPUT UPDATE
GROUP C
CHNLS
80–119
GROUP B
Figure 45. Using FIFO Mode 400 Channels Updated in Under 30 μs
TIME FOR GROUP B
OUTPUT UPDATE
GROUP D
120–159
CHNLS
TIME TO UPDATE 400 CHANNELS = 28.8μs
GROUP E
160–199
CHNLS
Rev. A | Page 37 of 40
GROUP F
200–239
CHNLS
In such systems, as many as 400 channels need to be updated
within 40 μs. Four-hundred channels requires the use of 10
AD5380s. With FIFO mode enabled, the data write cycle time
is 40 ns; therefore, each group consisting of 40 channels can be
fully loaded in 1.6 μs. In FIFO mode, a complete group of 40
channels will update in 14.4 μs. The time taken to update all
400 channels is 14.4 μs + 9 × 1.6 μs = 28.8 μs. Figure 45 shows
the FIFO operation scheme.
GROUP G
240–279
CHNLS
GROUP H
280–319
CHNLS
TIME FOR GROUP J
OUTPUT UPDATE
FIFO DATA LOAD
GROUP J
GROUP I
320–359
CHNLS
GROUP J
360–399
CHNLS
1.6μs
14.4μs
AD5380