HL100-06Z 200 5% Vishay, HL100-06Z 200 5% Datasheet - Page 4
![Wirewound Resistors 100watt 200ohms 5%](/photos/16/50/165080/hlnhl_sml.jpg)
HL100-06Z 200 5%
Manufacturer Part Number
HL100-06Z 200 5%
Description
Wirewound Resistors 100watt 200ohms 5%
Manufacturer
Vishay
Series
HL, NHLr
Datasheet
1.HL05006Z15R00JJ.pdf
(5 pages)
Specifications of HL100-06Z 200 5%
Resistance
200 Ohms
Tolerance
5 %
Power Rating
100 Watts
Temperature Coefficient
+/- 30 PPM / C
Operating Temperature Range
- 55 C to + 350 C
Dimensions
23.02 mm Dia. x 165.1 mm L
Product
Power Resistors Wire Wound Silicon Coated
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
MATERIAL SPECIFICATIONS
Element: Copper-nickel alloy of nickel-chrome alloy,
depending on resistance value
Core: Ceramic, steatite
Coating: Special high temperature silicone
Standard Terminals: Model “Z” terminals are tinned steel
Terminal Bands: Steel
Part Marking: DALE, Model, Wattage, Value, Tolerance,
Date Code
Document Number: 30208
Revision: 13-Jul-07
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Storage
High Temperature Exposure
Moisture Resistance
Shock, Specified Pulse
Vibration, High Frequency
Load Life
Industrial Power, Tubular (HL), Non-Inductive Tubular (NHL)
Derating
Rated power applied until thermally stable,
then a minimum of 15 minutes at - 55 °C
10 x rated power for 5 seconds
1000 V
- 55 °C for 24 hours
250 hours at + 350 °C
MIL-STD-202 Method 106, 7b not applicable
MIL-STD-202 Method 213, 100 g's for 6 milliseconds, 10 shocks
Frequency varied 10 to 2000 Hz, 20 g peak, 2 directions 6 hours each
1000 hours at rated power, + 25 °C, 1.5 hours “ON”, 0.5 hours “OFF”
120
100
For technical questions, contact: ww2bresistors@vishay.com
80
60
40
20
- 65 - 50
0
rms
, 1 minute
Wirewound Resistors
0
25
50
CONDITIONS OF TEST
150
AMBIENT TEMPERATURE IN
NHL NON-INDUCTIVE
Models of equivalent physical and electrical specifications
are available with non-inductive (Aryton-Perry) winding.They
are identified by adding the letter N to the front of the HL
type designation (NHL-225 for example). For NHL models
maximum resistance values are lower, see STANDARD
ELECTRICAL SPECIFICATIONS table.
250
°
350
C
± (2.0 % + 0.05 Ω) ΔR
± (2.0 % + 0.05 Ω) ΔR
± (0.1 % + 0.05 Ω) ΔR
± (2.0 % + 0.05 Ω) ΔR
± (2.0 % + 0.05 Ω) ΔR
± (2.0 % + 0.05 Ω) ΔR
± (0.2 % + 0.05 Ω) ΔR
± (0.2 % + 0.05 Ω) ΔR
± (3.0 % + 0.05 Ω) ΔR
Vishay Dale
TEST LIMITS
HL, NHL
www.vishay.com
73