ATF2500CL-20JC Atmel, ATF2500CL-20JC Datasheet - Page 4

• Manufacturer Part Number: ATF2500CL-20JC
• Description: IC CPLD EE 20NS 40PLCC
• Manufacturer: Atmel
• Series: ATF2500C(L)r

Specifications of ATF2500CL-20JC

• Programmable Type: In System Programmable
• Delay Time Tpd(1) Max: 20.0ns
• Voltage Supply - Internal: 4.75 V ~ 5.25 V
• Number Of Macrocells: 24
• Number Of I /o: 24
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 44-PLCC
• Voltage: 5V
• Memory Type: EEPROM
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Number Of Logic Elements/cells: -

Preload and
Observability of
Registered
Outputs
Programming
Software
Support
Security Fuse
Usage
Bus-friendly
Pin-keeper
Input and I/O
4
ATF2500C Family
The ATF2500Cs registers are provided with circuitry to allow loading of each register asyn-
chronously with either a high or a low. This feature will simplify testing since any state can be
forced into the registers to control test sequencing. A V
appropriate register high; a V
tion bit settings.
The PRELOAD state is entered by placing an 10.25V to 10.75V signal on SMP lead 42. When
the preload clock SMP lead 23 is pulsed high, the data on the I/O pins is placed into the 12
registers chosen by the Q select and even/odd select pins.
Register 2 observability mode is entered by placing an 10.25V to 10.75V signal on pin/lead 2.
In this mode, the contents of the buried register bank will appear on the associated outputs
when the OE control signals are active.
All family members of the ATF2500C can be designed with Atmel-WinCUPL
Designer
Additionally, the ATF2500C may be programmed to perform the ATV2500Hs functional subset
(no T-type flip-flops, pin clocking or D/T2 feedback) using the ATV2500H JEDEC file. In this
case, the ATF2500C becomes a direct replacement or speed upgrade for the ATV2500H. The
ATF2500C are direct replacements for the ATV2500B/BQ and the ATV2500H, including the
lack of extra grounds on P4 and P26.
A single fuse is provided to prevent unauthorized copying of ATF2500C fuse patterns. Once
programmed, the outputs will read programmed during verify.
The security fuse should be programmed last, as its effect is immediate.
The security fuse also inhibits Preload and Q2 observability.
All ATF2500C family members have programmable internal input and I/O pin-keeper circuits.
The default condition, including when using the AT2500C/CQ family to replace the
AT2500B/BQ or AT2500H, is that the pin-keepers are not activated.
When pin-keepers are active, inputs or I/Os not being driven externally will maintain their last
driven state. This ensures that all logic array inputs and device outputs are known states. Pin-
keepers are relatively weak active circuits that can be easily overridden by TTL-compatible
drivers (see input and I/O diagrams below).
Enabling or disabling of the pin-keeper circuits is controlled by the device type chosen in the
logic compiler device selection menu. Please refer to the Software Compiler Mode Selection
table for more details. Once the pin-keeper circuits are disabled, normal termination proce-
dures required for unused inputs and I/Os.
®
support is expected soon. Check Atmel’s web site for the latest version of ProChip.
IL
will force it low, independent of the polarity or other configura-
IH
level on the odd I/O pins will force the
™
0777I–PLD–4/03
. ProChip