21-524215-200 Amphenol, 21-524215-200 Datasheet - Page 4

• Manufacturer Part Number: 21-524215-200
• Description: Circular MIL / Spec Connectors Sz 15 Box Mount Receptacle
• Manufacturer: Amphenol
• Series: FTV Seriesr

Specifications of 21-524215-200

• Mil Type: MIL-DTL-38999 III
• Product Type: Connectors
• Shell Style: Receptacle
• Shell Size: 15
• Insert Arrangement: 15-20
• Mating Style: Threaded
• Mounting Style: Panel
• Shell Plating: Electroless Nickel
• Mounting Angle: Straight
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

EMI Capabilities
for maximum design flexibility
The Amphenol
technologies to provide the user with the most cost effective
performance across the frequency range. (For EMP perfor-
mance data, see pages 63-66).
The tubular design offers over 40 years of proven field reliabil-
ity. All filter contacts within the connector share a common
ground plane, which is connected to the connector shell. The
pin to pin isolation is 85 dB minimum at 100 MHz. The planar
design joins pins to a multi-layered ceramic forming an array
sub-assembly, with a peripheral ground which is connected to
the connector shell via a ground spring. Pin to pin capacitance
is less than 50 pf with a pin to pin isolation of 85 dB minimum at
100 MHz.
External Margin
Solder Joint
Ceramic Capacitor
Pi Type Tubular Contact Assembly
®
EMI filter connector utilizes two manufacturing
Ground Electrode
Hot Electrodes
Internal Margin
External Margin
Ferrite Inductor
Solder Joint
2
Filter contacts for both designs contain either a pi passive ele-
ment network comprised of a ferrite inductor and ceramic
capacitor, or a single capacitor.
For planar designs other filter networks are available, ie. T
Type, L-C Type and C-L Type. An encapsulant of oven-cured
epoxy in the rear provides:
• Mechanical and thermal insulation of the ceramic elements
• Hermeticity (4.6 x 10
– mechanical loading can be accomplished without capaci-
tor damage. Pins can be bent 90° and straightened with no
damage to the filter.
ing through the rear of the connector in high humidity envi-
ronments. Amphenol recommends using metal protection
Solder Washer
or Spring
Clip
* More in-depth information on attenuation is available in:
L-1146, General Design Guideline for EMI Filters and/or
TVS (Transient Voltage Suppression) Connectors.
Also for further information ask for:
Pi Type Planar Array Assembly
caps during cleaning operations.
-3
cc/sec) – prevents water from enter-
Grounding Ring
Ferrite Inductor
Ground
Electrode
Hot
Electrode