EPF10K100ABC356-2N Altera, EPF10K100ABC356-2N Datasheet - Page 40

• Manufacturer Part Number: EPF10K100ABC356-2N
• Description: IC FLEX 10KA FPGA 100K 356-BGA
• Manufacturer: Altera
• Series: FLEX-10K®r

Specifications of EPF10K100ABC356-2N

• Number Of Logic Elements/cells: 4992
• Number Of Labs/clbs: 624
• Total Ram Bits: 24576
• Number Of I /o: 274
• Number Of Gates: 158000
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 356-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Note
(1)
IEEE Std.
1149.1 (JTAG)
Boundary-Scan
Support
40
FLEX 10K Embedded Programmable Logic Device Family Data Sheet
Table 12. Supply Voltages & MultiVolt I/O Support Levels
240-pin QFP packages do not support the MultiVolt I/O features, so they do not have separate V
FLEX 10K
EPF10K50V
EPF10K130V
FLEX 10KA
Devices
(1)
(1)
(1)
Table 12
I/O support levels.
Power Sequencing & Hot-Socketing
Because FLEX 10K devices can be used in a multi-voltage environment,
they have been designed specifically to tolerate any possible power-up
sequence. The V
order.
Signals can be driven into FLEX 10KA devices before and during power
up without damaging the device. Additionally, FLEX 10KA devices do
not drive out during power up. Once operating conditions are reached,
FLEX 10KA devices operate as specified by the user.
All FLEX 10K devices provide JTAG BST circuitry that complies with the
IEEE Std. 1149.1-1990 specification. All FLEX 10K devices can also be
configured using the JTAG pins through the BitBlaster serial download
cable, or ByteBlasterMV parallel port download cable, or via hardware
that uses the Jam
performed before or after configuration, but not during configuration.
FLEX 10K devices support the JTAG instructions shown in
V
CCINT
5.0
5.0
3.3
3.3
3.3
3.3
Supply Voltage (V)
describes the FLEX 10K device supply voltages and MultiVolt
CCIO
TM
V
5.0
3.3
3.3
3.3
3.3
2.5
CCIO
programming and test language. JTAG BST can be
and V
CCINT
2.5, 3.3, or 5.0
3.3 or 5.0
3.3 or 5.0
3.3 or 5.0
3.3 or 5.0
2.5, 3.3, or 5.0
power supplies can be powered in any
MultiVolt I/O Support Levels (V)
Input
Altera Corporation
5.0
2.5
3.3 or 5.0
3.3 or 5.0
3.3 or 5.0
3.3 or 5.0
CCIO
Output
Table
pins.
13.