142-4308-401 Emerson Network Power, 142-4308-401 Datasheet - Page 208

• Manufacturer Part Number: 142-4308-401
• Description: RF Connectors BLHD JCK 142/400 GLD
• Manufacturer: Emerson Network Power

Specifications of 142-4308-401

• Product: Connector
• Rf Series: SMA
• Gender: Receptacle
• Polarity: Reverse
• Contact Plating: Gold
• Shell Plating: Gold
• Impedance: 50 Ohms
• Termination Style: Crimp, Solder
• Body Style: Straight
• Connector Type: Jack
• Maximum Frequency: 12.4 GHz
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

208
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
MMCX Right Angle Plug for .047 (1.20) Diameter
and RG-178 Size Flexible Cable with Crimp Insert
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
1. Identify piece parts. (3 piece parts)
2. Strip cable jacket to dimensions shown. Do not nick braid
3. Slide crimp insert over braid and against jacket. Fold braid
4. Slide body assembly over cable and crimp insert, then
5. Solder contact to center conductor through rear access
6. Press end cap into access port using .156 (3.96) diameter
CABLE GROUP
or center conductor during strip operations.
around crimp insert as shown. Strip cable dielectric to
dimension shown. Tin center conductor.
seat firmly so cable dielectric butts against contact as
shown. Crimp body using recommended crimp hex.
Maintain forward pressure on cable while crimping.
port. Use a minimum amount of solder for a full fillet joint.
flat punch or Johnson assembly tool 141-0000-910.
RG-178/U, 196
•
.047 Flexible
www.EmersonNetworkPower.com/connectivity
135-3436-101
135-3402-101
PART NO.
.140 (3.56) .105 (2.67)
.188 (4.78) .105 (2.67)
“L”
CRIMP HEX