901-B6001-392 Amphenol, 901-B6001-392 Datasheet - Page 7

• Manufacturer Part Number: 901-B6001-392
• Description: RF Connectors SMA PANEL RECEPT CONNECTOR
• Manufacturer: Amphenol

Specifications of 901-B6001-392

• Product: Connector
• Rf Series: SMA
• Gender: Receptacle
• Contact Plating: Gold
• Shell Plating: Gold
• Impedance: 50 Ohms
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Amphenol
®
RF:
Note: These characteristics are typical but may not apply to all connectors.
Reverse Polarity SMA Specifications
Electrical
Impedance
Frequency range
RF-leakage
Voltage rating (at sea level)
Contact resistance
Insulation resistance
Dielectric withstanding voltage
Mechanical
Mating
Coupling nut retention force
Braid/Jacket cable affixment
Center conductor cable affixment
Captivated contacts
Durability (matings)
Environmental
Temperature range
Weatherproof
Thermal shock
Moisture resistance
Corrosion
Vibration
Mechanical shock
Altitude
Material
Center contact
Crimp ferrule
Other metal parts
Insulator
Gasket
Military
MIL-C-39012
MIL-C-83517 SMA
Plug
800-627-7100
50 Ω
DC - 18 GHz (semi-rigid cable)
DC - 12.4 GHz (flexible cable)
100 dB-f minimum @ 3 GHz (semi-rigid cable)
60 dB minimum @ 3 GHz (flexible cable)
≤ 500 Vrms (semi-rigid, depending on cable)
≤ 335 Vrms (flexible, depending on cable)
center contact: ≤ 2 mΩ
outer contact: ≤ 2 mΩ
braid to body: ≤ 0.5 mΩ
5,000 MΩ minimum
1,500 Vrms (semi-rigid cable, at sea level)
1,000 Vrms (flexible cable, at sea level)
.250-36 threaded coupling
100 in-lbs (300 N-cm) min.
Crimp and solder types
Solder, unless noted otherwise
All types, unless noted otherwise
100 cycles min. (brass), 500 cycles min. (stainless steel)
-65°C to +165°C
crimp: w/ heat shrink tubing, solder: w/ gasket
MIL-STD-202, method 107, cond. B
MIL-STD-202, method 106 (except step 7b)
MIL-STD-202, method 101, cond. B
MIL-STD-202, method 204, cond. D
MIL-STD-202, method 213, cond. 1
MIL-STD-202, method 105, cond. C (n/a 70,000 ft)
Beryllium copper, gold plated
Copper or brass
Non-magnetic stainless steel or brass, gold, silver or nickel plated
PTFE (ASTM D1457)
Silicone rubber (MIL-R-5847 and ZZ-R-765)
where applicable
where applicable
Jack
SMA
SMA
65