DLP-2232PB-G DLP Design Inc, DLP-2232PB-G Datasheet - Page 5

• Manufacturer Part Number: DLP-2232PB-G
• Description: MODULE USB-MCU FT2232D W/16F877A
• Manufacturer: DLP Design Inc

Specifications of DLP-2232PB-G

• Module/board Type: Adapter Board
• Interface Type: USB
• Data Bus Width: 8 bit
• Operating Supply Voltage: 5 V
• Product: Interface Modules
• For Use With/related Products: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 813-1002

EEPROM WRITE UTILITY
The DLP-2232PB has the option to accept manufacturer-specific information that is written into
the on-board 93C56 EEPROM. Parameters that can be programmed include the VID and the
PID identifiers, the manufacturer's product string, and a serial number. Additionally, the basic
modes of operation for the FT2232D (USB-UART, USB-FIFO, etc) and desired drivers (VCP or
DLL) are also selected via the configuration settings in the EEPROM.
*** The default configuration for both channels is 245FIFO and D2XX DLL drivers.
MPROG version 2.2 is the latest EEPROM serializer utility from FTDI for the FT2232D device.
MPROG is based on the new combinational VCP / D2XX DLL driver package. This driver
package acts as VCP Drivers for Windows 98 / ME / 2000 / XP and D2XX drivers for Windows
2000 / XP. In the near future, FTDI will be publishing a version including D2XX support for
Windows 98 / ME.
MPROG will update the contents of the EEPROM even if the VCP drivers are currently selected
in the EEPROM.
QUICK START GUIDE
This guide requires the use of a Windows 98/ME/2000/XP PC that is equipped with a USB
port.
1. Download the
2. The DLP-2232PB can be configured to receive its operating power from the USB port or from
3. Connect the DLP-2232PB board to the PC via a standard A-B, 6-foot USB cable. This action
V1.7
ftdichip.com. Unzip the drivers onto a blank floppy disk or into a folder on the hard drive.
user electronics. Pins 23 and 24 allow for this configuration. (Refer to the Pinout Description
in the next section for a detailed description of the DLP-2232PB electrical interface.)
Note: The board will not operate until a power source has been selected as mentioned in
Step 2.
initiates the loading of the USB drivers. When prompted, select the folder where the device
drivers were stored in Step 1. Windows will then complete the installation of the device
combined Windows VCP / D2XX driver set
Page 5 of
15
from either dlpdesign.com or
May 2010