101-1006 Rabbit Semiconductor, 101-1006 Datasheet - Page 230

• Manufacturer Part Number: 101-1006
• Description: MODULE POWERCORE FLEX 3800
• Manufacturer: Rabbit Semiconductor

Specifications of 101-1006

• Module/board Type: MPU Core Module
• For Use With/related Products: RCM3800
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

DESCRIPTION
PARAMETERS
RETURN VALUE
SEE ALSO
222
int rn_enable_wdt(int handle, int wdttype);
rn_hitwd, rn_sw_wdt
Enables the hardware and/or software watchdog timers on a peripheral card. The soft-
ware on the peripheral card will keep the hardware watchdog timer updated, but will hard
reset if the time expires. The hardware watchdog cannot be disabled except by a hard
reset on the peripheral card. The software watchdog timer must be updated by software
on the master. The peripheral card will soft reset if the timeout set by
expires.
is connected to a master.
handle
wdttype
The status byte from the previous command. -1 means that device information indicates
the peripheral card is not connected to the master.
This function will
is an address index to device information. Use
rn_find()
0 enables both hardware and software watchdog timers
1 enables hardware watchdog timer
2 enables software watchdog timer
check device information to determine that the peripheral card
rn_enable_wdt
to establish the handle.
rn_device()
rn_sw_wdt()
PowerCore FLEX
or