101-0526 Rabbit Semiconductor, 101-0526 Datasheet - Page 56

• Manufacturer Part Number: 101-0526
• Description: COMPUTER SNGLBD LP3510 FOX7.4MHZ
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0526

• Module/board Type: Single Board Computer Module
• For Use With/related Products: LP3510
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PARAMETERS
SEE ALSO
RETURN VALUE
SEE ALSO
PARAMETER
RETURN VALUE
SEE ALSO
50
void digInAlert(int channel, int value, int
int rdPowerState(void);
int setPowerSource(int state);
Use this function to poll a selected digital input until a timeout occurs. The function call forces the
LP3500 to enter the low-power mode using the battery for polling. Upon activation of the channel or
expiration of the timeout, this function will enable the normal power mode and exit.
Use devPowerSet(ALLDEVICES, int state) before and after this function call to deactivate
and activate all devices to operate at less power.
channel is the digital input channel (IN00– IN15) to poll
value is the input value of 0 or 1 to receive
lowpowermode is the low-power mode setting to enter, usually 10 (see powerMode())
maxpowermode is the maximum operating power mode setting to enter, usually 1 (see power-
Mode())
powersource
timeout is the timeout in seconds if an input is not received. Enter 0 for no timeout.
Determines if the LP3500 is running under battery power or a raw DC power source.
0 if on raw DC power source
1 if on battery power
Turns the linear regulator “off” or “on.”
0 for normal power source
1 for battery
0 if successful
-1 if raw DC power source is not available
-2 if battery is not available
1 = battery
2 = raw DC power
lowpowermode, int maxpowermode, int powersource,
unsigned long timeout)
powerMode, serCommAlert, timedAlert, devPowerSet
powerMode, setPowerState
powerMode, rdPowerState
Fox (LP3500)