101-0788 Rabbit Semiconductor, 101-0788 Datasheet - Page 22

• Manufacturer Part Number: 101-0788
• Description: COMPUTER SGL-BOARD OP6600 W/SRAM
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0788

• Module/board Type: Single Board Computer Module
• For Use With/related Products: OP6600
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 101-788; 101-788

3.1 Intellicom Subsystems
Figure 5 shows the Rabbit-based subsystems designed into the Intellicom.
Figure 5. Intellicom Rabbit-Based Subsystems
The Intellicom board has 15 pins on header J7, one RJ-12 jack for RS-232 or RS-485
serial communication, and one Ethernet jack (OP6700 only). The pinouts are shown in
Figure 6.
Figure 6. Intellicom I/O Pinout
RJ-45 pinouts are sometimes numbered opposite to the way shown in Figure 6. Regardless
of the numbering convention followed, the pin positions relative to the spring tab position
(located at the bottom of the RJ-45 jack in Figure 6) are always absolute, and the RJ-45
connector will work properly with off-the-shelf Ethernet cables.
18
Intellicom (OP6600/OP6700)