101-0570 Rabbit Semiconductor, 101-0570 Datasheet - Page 65

• Manufacturer Part Number: 101-0570
• Description: COMPUTER SNGLBD BL2120 FRCTNLOCK
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0570

• Module/board Type: Single Board Computer Module
• Product: Modules
• Data Bus Width: 12 bit
• Processor Type: Rabbit 2000
• Sram: 128 KB
• Flash: 256 KB
• Timers: 8 bit
• Number Of I/os: 40
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 36 V
• Power Consumption: 1.5 W
• Board Size: 105 mm x 87 mm x 24 mm
• Description/function: Computer Module
• Ram: 512 KB
• For Use With/related Products: BL2120
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.2.3 Run the PINGME.C Demo
Connect the crossover cable from your computer’s Ethernet port to the BL2100’s RJ-45
Ethernet connector. Open this sample program from the
compile the program, and start it running under Dynamic C. When the program starts run-
ning, the green
is made. (Note: If the
you are using a hub perhaps the power is off on the hub.)
The next step is to ping the board from your PC. This can be done by bringing up the MS-
DOS window and running the ping program:
or by
and typing the command
Notice that the orange
indicates the transfer of data. The ping routine will ping the board four times and write a
summary message on the screen describing the operation.
User’s Manual
Start
ping 10.10.6.100
ping 10.10.6.100
>
Run
LNK
light on the BL2100 should be on to indicate an Ethernet connection
LNK
ACT
light does not light, you may not have a crossover cable, or if
light flashes on the BL2100 while the ping is taking place, and
SAMPLES\TCPIP\ICMP
folder,
59