.050" 28 AWG Stranded, Mass-Term, Halogen Free PO/PO
Physical
Note: Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between signal conductors within a pair.
Environmental
UL File No.: E42769, Style No.: 21683
3
Interconnect Solutions
http://www.3Mconnector.com
Electrical
™
Characteristic Impedance:
Velocity of Propagation:
Insulation Resistance:
Flammability Rating:
Temperature Rating:
Marking Standard:
Propagation Delay:
Jacket Material:
Voltage Rating:
Primary Material:
Capacitance:
Conductors:
Inductance:
Shielding:
Color:
Color:
Halogen Free Polyolefin (PO)
Dark Gray
Halogen Free Polyolefin (PO)
Dark Gray
None
28 AWG, 7 × 36 AWG [ 7 × Ø 0.127 ] Tinned Stranded Copper
0.001 [0.03] Thick Aluminum/Polyester Film Foil and 90% Coverage Tinned Copper Braid
USA: 150V
(Primary Cable) > 1 × 10
Unbalanced
54 Ω
28.7 pF/ft [ 84.2 pF/m ]
0.08 μH/ft [ 0.27 μH/m ]
1.55 ns/ft [ 4.95 ns/m ]
66%
-40°C to +105°C
USA: VW-1
Halogen Free is defined as both 1) no halogen compounds that are intentionally added to the product or used in
than 900 ppm chlorine and/or less than 1500ppm total bromine and chlorine. The latter are the levels set forth
in certain industry standards for printed circuit boards, such as the International Electrotechnical Commission
the manufacturing process for the product and 2) any impurities present are less than 900 ppm bromine, less
(IEC) 61249-2-21 standard. This information represents 3M/s knowledge and belief which may be based in
Canada: 150V
• Low Smoke Zero Halogen (LSZH) Insulation. Advantages of
• Broad operating temperature range from -40°C to 105°C
• Round construction permits easier routing
• 28 AWG wire on .050 inch centers permits mass termination to
• Continuous split/bond repeat allows for mass termination of IDC
• Dual shielding provides 35 db average shielding
• Primary cable is zippable for branching or discrete terminations
• See the Regulatory Information Appendix (RIA)
Date Modified: December 3, 2010
10
Ω/10 ft. [ 3 m ]
LSZH insulation are the low smoke (IEC 61034-2:2005), and low
toxicity of combustion gases (NF X 70-100-2:2006), reducing the
risk to firefighters, and reducing the soot and corrosion damage to
nearby equipment
broad line of IDC connectors
connectors
in the “RoHS compliance” section of www.3Mconnector.com for
compliance information (RIA E1 & C1 apply)
Balanced
107 Ω
14.4 pF/ft [ 47.2 pF/m ]
0.16 μH/ft [ 0.52 μH/m ]
1.54 ns/ft [ 4.95 ns/m ]
66%
EU: <50V
Canada: FT-1
For technical, sales or ordering information call
whole or in part on information provided by 3rd party suppliers to 3M.
3M is a trademark of 3M Company.
HF659 Series
800-225-5373
Sheet 1 of 2
TS-2335-B