PIC16F616T-I/SL Microchip Technology, PIC16F616T-I/SL Datasheet - Page 119

• Manufacturer Part Number: PIC16F616T-I/SL
• Description: IC PIC MCU FLASH 2KX14 14SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F616T-I/SL

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Number Of I /o: 11
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 14-SOIC (3.9mm Width), 14-SOL
• Controller Family/series: PIC16F
• No. Of I/o's: 12
• Ram Memory Size: 128Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Connectivity: -
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MCP1631RD-DCPC1 - REF DES BATT CHARG OR LED DRIVERAC162083 - HEADER MPLAB ICD2 PIC16F616 8/14
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

12.4.2
An overflow (FFh → 00h) in the TMR0 register will set
the T0IF bit of the INTCON register. The interrupt can
be enabled/disabled by setting/clearing T0IE bit of the
INTCON register. See Section 5.0 “Timer0 Module”
for operation of the Timer0 module.
FIGURE 12-7:
© 2009 Microchip Technology Inc.
TIMER0 INTERRUPT
TMR2IF
TMR2IE
CCP1IF
CCP1IE
IOC-RA0
IOC-RA1
IOC-RA2
IOC-RA3
IOC-RA4
IOC-RA5
TMR1IE
TMR1IF
ADIF
ADIE
IOCA0
IOCA1
IOCA2
IOCA3
IOCA4
IOCA5
C1IF
C1IE
C2IF
C2IE
(2)
(2)
(2)
(2)
(2)
(2)
INTERRUPT LOGIC
Note 1:
PIC16F610/616/16HV610/616
2:
RAIE
INTF
INTE
RAIF
PEIE
T0IF
T0IE
GIE
Some peripherals depend upon the system clock for
operation. Since the system clock is suspended during Sleep, only
those peripherals which do not depend upon the system clock will wake
the part from Sleep. See Section 12.7.1 “Wake-up from Sleep”.
PIC16F616/16HV616 only.
12.4.3
An input change on PORTA sets the RAIF bit of the
INTCON register. The interrupt can be enabled/
disabled by setting/clearing the RAIE bit of the INTCON
register. Plus, individual pins can be configured through
the IOCA register.
Note:
PORTA INTERRUPT-ON-CHANGE
If a change on the I/O pin should occur
when any PORTA operation is being
executed, then the RAIF interrupt flag may
not get set.
Wake-up (If in Sleep mode)
Interrupt to CPU
DS41288F-page 119
(1)