MPC8313VRAGDB Freescale Semiconductor, MPC8313VRAGDB Datasheet - Page 4

• Manufacturer Part Number: MPC8313VRAGDB
• Description: MPU POWERQUICC II PRO 516-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC8313VRAGDB

• Processor Type: MPC83xx PowerQUICC II Pro 32-Bit
• Speed: 400MHz
• Voltage: 0.95 V ~ 1.05 V
• Mounting Type: Surface Mount
• Package / Case: 516-PBGA
• Processor Series: MPC8xxx
• Core: e300
• Data Bus Width: 32 bit
• Development Tools By Supplier: MPC8313E-RDB
• Maximum Clock Frequency: 400 MHz
• Operating Supply Voltage: - 0.3 V to + 1.26 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Data Ram Size: 16 KB
• I/o Voltage: - 0.3 V, + 2.75 V
• Interface Type: I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• Program Memory Type: EEPROM/Flash
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Overview
1.6
The MPC8313E USB controller includes the following features:
1.7
The MPC8313E eTSECs include the following features:
4
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Supports USB on-the-go mode, which includes both device and host functionality, when using an
external ULPI (UTMI + low-pin interface) PHY
Compatible with Universal Serial Bus Specification, Rev. 2.0
Supports operation as a stand-alone USB device
— Supports one upstream facing port
— Supports three programmable USB endpoints
Supports operation as a stand-alone USB host controller
— Supports USB root hub with one downstream-facing port
— Enhanced host controller interface (EHCI) compatible
Supports full-speed (12 Mbps), and low-speed (1.5 Mbps) operation. Low-speed operation is
supported only in host mode.
Supports UTMI + low pin interface (ULPI) or on-chip USB 2.0 full-speed PHY
Two RGMII/SGMII/MII/RMII/RTBI interfaces
Two controllers designed to comply with IEEE Std 802.3®, 802.3u®, 802.3x®, 802.3z®,
802.3au®, and 802.3ab®
Support for Wake-on-Magic Packet™, a method to bring the device from standby to full operating
mode
MII management interface for external PHY control and status
Three-speed support (10/100/1000 Mbps)
On-chip high-speed serial interface to external SGMII PHY interface
Support for IEEE Std 1588™
Support for two full-duplex FIFO interface modes
Multiple PHY interface configuration
TCP/IP acceleration and QoS features available
IP v4 and IP v6 header recognition on receive
IP v4 header checksum verification and generation
TCP and UDP checksum verification and generation
Per-packet configurable acceleration
Recognition of VLAN, stacked (queue in queue) VLAN, IEEE Std 802.2®, PPPoE session, MPLS
stacks, and ESP/AH IP-security headers
Transmission from up to eight physical queues.
Reception to up to eight physical queues
USB Dual-Role Controller
Dual Enhanced Three-Speed Ethernet Controllers (eTSECs)
MPC8313E PowerQUICC
™
II Pro Processor Hardware Specifications, Rev. 3
Freescale Semiconductor