APF30-30-13CB CTS, APF30-30-13CB Datasheet - Page 11
![Heatsinks 30x30x13mm](/photos/32/60/326079/apf_sml.jpg)
APF30-30-13CB
Manufacturer Part Number
APF30-30-13CB
Description
Heatsinks 30x30x13mm
Manufacturer
CTS
Datasheet
1.Z3A45SBSBNR.pdf
(24 pages)
Specifications of APF30-30-13CB
Product
Heatsinks
Mounting Style
SMD/SMT
Heatsink Material
Black Anodized
Fin Style
Horizontal
Thermal Resistance
2.45 C / W
Dimensions
30 mm L x 30 mm W x 12.7 mm H
Designed For
BGA, PGA, PLCC, QFP
Color
Black
STANDARD ZIF CIRCUIT BOARD RETAINERS
assembly that provides a highly effective thermal interface
between the circuit board and coldwall. Board lengths
between 1-1/2” and 12” can be accommodated.
(coldwall). The standard configuration is attached with 4-40
hardware. However, the retainer housing can be supplied
GENERAL DESCRIPTION
DESIGN FEATURES
ZIF retainers are mounted to any flat metal surface
The ZIF retainer is a totally self-contained, precision
A ZIF retainer consists of:
(1) an aluminum housing
(2) a rod/cam assembly constructed from an aluminum
(3) a beryllium copper spring
■
■
■
■
■
■
VISUAL INDICATION
QUICK LOCKING ACTION
UNIFORM HEAT TRANSFER
COMPLETE INTERCHANGEABILITY
OPERATING ENVIRONMENT
MAINTAINABILITY
rod assembly is driven by one of three options: pin,
or stainless steel double flat rod extrusion. The ZIF
hex-head or screwdriver slot
The unique design and interchangeability of like parts make field repairs quick and simple. Repairs
The locking operation which secures the PCB in the ZIF retainer requires only a 1/4 turn of the
Uniform clamping pressure eliminates hot spots along the PCB interface producing an even
distribution of heat along the entire edge.
ZIF component parts are designed to assure consistent performance and interchangeability of
all identical part numbers.
ZIF characteristics are unaffected by adverse environments typically encountered in military
and industrial applications.
rod assembly.
can be accomplished without the use of any special tools. Although ZIF retainers have been tested
maintenance to ZIF assemblies.
ZIF provides a visual indication that the rods are in the “open” or “closed” position relative to
the position of the drive assembly.
for over a thousand lock-unlock cycles, they have been derated and specified for 400 fully loaded
cycles. This, in most cases, will exceed the overall system life, virtually eliminating service or
with tapped holes for M3x.5 metric hardware, or left
undrilled with only index pins for vacuum brazing, dip
brazing or epoxy bonding.
confidence that it will perform as described. Complete
product specifications are available upon request.
and results are available upon request:
The following CTS laboratory test procedures, reports
THREE ZIF CONFIGURATIONS
Engineers who specify the ZIF retainer can have
•
•
•
•
•
thermal performance testing
shock testing
vibration testing
torque testing
life cycling
■
■
■
STANDARD ZIF (coldwall mounted)
ZIF III (PCB mounted)
MACHINED ZIF (ZIF geometry
machined into coldwall)
CTS
11
®