MPC855TZQ80D4 Freescale Semiconductor, MPC855TZQ80D4 Datasheet - Page 5

• Manufacturer Part Number: MPC855TZQ80D4
• Description: IC MPU POWERQUICC 80MHZ 357PBGA
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICCr

Specifications of MPC855TZQ80D4

• Processor Type: MPC8xx PowerQUICC 32-Bit
• Speed: 80MHz
• Voltage: 3.3V
• Mounting Type: Surface Mount
• Package / Case: 357-PBGA
• Processor Series: MPC8xx
• Core: MPC8xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 80 MHz
• Operating Supply Voltage: 2.5 V, 3.3 V
• Maximum Operating Temperature: + 95 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Core Size: 32 Bit
• Program Memory Size: 8KB
• Cpu Speed: 80MHz
• Digital Ic Case Style: BGA
• No. Of Pins: 357
• Supply Voltage Range: 3.135V To 3.465V
• Rohs Compliant: No
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Freescale Semiconductor
•
•
•
•
•
•
— Up to 8 Kbytes of dual-port RAM
— 16 serial DMA (SDMA) channels
— Three parallel I/O registers with open-drain capability
Four baud-rate generators (BRGs)
— Independent (can be tied to any SCC or SMC)
— Allows changes during operation
— Autobaud support option
Four serial communications controllers (SCCs)
— Ethernet/IEEE 802.3® standard optional on SCC1–4, supporting full 10-Mbps operation
— HDLC/SDLC (all channels supported at 2 Mbps)
— HDLC bus (implements an HDLC-based local area network (LAN))
— Asynchronous HDLC to support point-to-point protocol (PPP)
— AppleTalk
— Universal asynchronous receiver transmitter (UART)
— Synchronous UART
— Serial infrared (IrDA)
— Binary synchronous communication (BISYNC)
— Totally transparent (bit streams)
— Totally transparent (frame-based with optional cyclic redundancy check (CRC))
Two SMCs (serial management channels)
— UART
— Transparent
— General circuit interface (GCI) controller
— Can be connected to the time-division multiplexed (TDM) channels
One SPI (serial peripheral interface)
— Supports master and slave modes
— Supports multimaster operation on the same bus
One I
— Supports master and slave modes
— Multiple-master environment support
Time-slot assigner (TSA)
— Allows SCCs and SMCs to run in multiplexed and/or non-multiplexed operation
— Supports T1, CEPT, PCM highway, ISDN basic rate, ISDN primary rate, user defined
— 1- or 8-bit resolution
— Allows independent transmit and receive routing, frame synchronization, and clocking
(available only on specially programmed devices)
2
C (inter-integrated circuit) port
MPC860 PowerQUICC™ Family Hardware Specifications, Rev. 8
Features
5