PS-31-1000MM Omron, PS-31-1000MM Datasheet - Page 3

• Manufacturer Part Number: PS-31-1000MM
• Description: Sensor Hardware & Accessories ELECTRODE ASSRHS.
• Manufacturer: Omron

Specifications of PS-31-1000MM

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Mounting
■ PS-3S Electrode Holders
Note: 1. OMRON does not sell couplings.
1. Mounting Electrode Holder
• Screw the Electrode Holder into the coupling
secured at the installation location.
Twin
clockwise
2. Screw in the Electrode until it reaches the bottom of the nut. Insufficient insertion will cause a faulty connection.
Coupling
http://www.ia.omron.com/
Electrode
Holder
2. Attaching Electrode(s) to Electrode section
• Insert each Electrode into the connecting nut,
• Connect the leads, inserted through the hole
secure the Electrode with the clamp screws,
and then tighten the lock nut.
of the rubber bushing, into the respective ter-
minals.
Electrode section
housing
Lock nut
Rubber
bushing
Electrode
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
3. Inserting Electrode section into Electrode
Holder
• Fit the Electrode section into the Electrode
• Check the Electrode section for proper wir-
Holder and secure it with the two screws.
ing, fit the rubber bushing in position, and
then cover the Electrode Holder with the drip-
proof cover.
Electrode
Holder
Electrode
section
housing
Drip-proof
cover
PS-@S(R)/-31
3