MC8640DVU1000HE Freescale Semiconductor, MC8640DVU1000HE Datasheet - Page 61
![no-image](/images/manufacturer_photos/0/2/262/freescale_semiconductor_sml.jpg)
MC8640DVU1000HE
Manufacturer Part Number
MC8640DVU1000HE
Description
IC MPU DUAL CORE E600 1023FCCBGA
Manufacturer
Freescale Semiconductor
Datasheet
1.MC8640HX1067NE.pdf
(130 pages)
Specifications of MC8640DVU1000HE
Processor Type
MPC86xx PowerPC 32-Bit
Speed
1.0GHz
Voltage
1.05V
Mounting Type
Surface Mount
Package / Case
1023-FCCBGA
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
MC8640DVU1000HE
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
13.2.2
The DC level requirement for the MPC8640D SerDes reference clock inputs is different depending on the
signaling mode used to connect the clock driver chip and SerDes reference clock inputs as described
below.
Freescale Semiconductor
•
•
SD n _REF_CLK
SD n _REF_CLK
Differential Mode
— The input amplitude of the differential clock must be between 400 mV and 1600 mV
— For external DC-coupled connection, as described in section 13.2.1, the maximum average
— For external AC-coupled connection, there is no common mode voltage requirement for the
Single-ended Mode
— The reference clock can also be single-ended. The SDn_REF_CLK input amplitude
— The SDn_REF_CLK input average voltage must be between 200 and 400 mV.
— To meet the input amplitude requirement, the reference clock inputs might need to be DC or
Figure 40. Differential Reference Clock Input DC Requirements (External DC-Coupled)
differential peak-peak (or between 200 mV and 800 mV differential peak). In other words,
each signal wire of the differential pair must have a single-ended swing less than 800 mV and
greater than 200 mV. This requirement is the same for both external DC-coupled or
AC-coupled connection.
current requirements sets the requirement for average voltage (common mode voltage) to be
between 100 mV and 400 mV.
for DC-coupled connection scheme.
clock driver. Since the external AC-coupling capacitor blocks the DC level, the clock driver
and the SerDes reference clock receiver operate in different command mode voltages. The
SerDes reference clock receiver in this connection scheme has its common mode voltage set to
SGND. Each signal wire of the differential inputs is allowed to swing below and above the
command mode voltage (SGND).
requirement for AC-coupled connection scheme.
(single-ended swing) must be between 400 mV and 800 mV peak-peak (from V
with SDn_REF_CLK either left unconnected or tied to ground.
the SerDes reference clock input requirement for single-ended signaling mode.
AC-coupled externally. For the best noise performance, the reference of the clock could be DC
or AC-coupled into the unused phase (SDn_REF_CLK) through the same source impedance as
the clock input (SDn_REF_CLK) in use.
DC Level Requirement for SerDes Reference Clocks
MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications, Rev. 3
200mV < Input Amplitude or Differential Peak < 800mV
Figure 40
Figure 41
shows the SerDes reference clock input requirement
shows the SerDes reference clock input
High-Speed Serial Interfaces (HSSI)
100mV < Vcm < 400mV
Vmax < 800mV
Vmin > 0V
Figure 42
min
to V
shows
max
)
61