LTIGK51-6S-WH-RC-NBL/125N/ON-O Carling Technologies, LTIGK51-6S-WH-RC-NBL/125N/ON-O Datasheet - Page 63

• Manufacturer Part Number: LTIGK51-6S-WH-RC-NBL/125N/ON-O
• Description: Rocker Switches & Paddle Switches ON-NONE-OFF DP LIGHTED
• Manufacturer: Carling Technologies

Specifications of LTIGK51-6S-WH-RC-NBL/125N/ON-O

• Contact Form: DP
• Switch Function: ON - NONE - OFF
• Contact Rating: 15 Amps at 125 Volts
• Termination Style: Tabs
• Actuator: Curved/Smooth Face Gloss
• Color: White
• Mounting Style: Panel
• Contact Plating: Gold
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Endurance . . . . . . . . . . . 250,000 cycles minimum
Contact Rating . . . . . . . . .4VA @ 24VDC (MAX) resistive
Dielectric Strength . . . . . . 1250 Volts RMS between pole to
Insulation Resistance . . . 50 Megohms
Initial Contact Resistance. 10 milliohms max. @ 4 VDC
Life . . . . . . . . . . . . . . . .
Contacts . . . . . . . . . . . . . 90/10 silver-nickel, silver tin-oxide,
Terminals . . . . . . . . . . . . Brass or copper/silver plate
Lighted . . . . . . . . . . . . . . Incandescent - rated 10,000 hours
Seals . . . . . . . . . . . . . . . Rocker, base & bracket are sealed.
Base . . . . . . . . . . . . . . .
Actuator . . . . . . . . . . . . . Nylon 66 Reinforced, rated to 105°C
Lens . . . . . . . . . . . . . . . . Polycarbonate rated at 100°C. Front
Connector . . . . . . . . . . . . Nylon 66 rated at 85°C. Polarized.
2 position . . . . . . . . . . . . 26°
3 positions . . . . . . . . . . . 13° from center
Electrical
Mechanical
Physical
Actuator Travel (Angular Displacement)
Carling
Technologies
™
LED - rated 100,000 hours 1/2 life
(LED is internally ballasted for volt-
ages to 24 VDC)
Polyester blend rated to 85°C with a
flammability rating of 94VO.
(modular lens). Locking rocker, stan-
dard rocker & paddle. Laser etching
with a polycarbonate actuator.
snap-in.
15 amps, 125 VAC
10 amps, 250 VAC
20 amps, 4-14 VDC
15 amps, 15-28 VDC
pole
3750 Volts RMS between live parts
and accessible surfaces
100,000 cycles maintained,
50,000 cycles momentary at rated
voltage and current
gold
3/16” (4.76mm) & 1/4” (6.3mm)
Quick Connect terminations standard.
www.carlingtech.com
Environmental . . . . . . . . . IP67, representing an index of
Corrosion Resistance . . . MFG Class III per ASTM B-827 &
Operating Temperature . . . -40° C to + 85° C
Vibration 1 . . . . . . . . . . . Per Mil-Std 202F, Method 204D Test
Vibration 2 . . . . . . . . . . . Resonance search
Shock . . . . . . . . . . . . . . . Per Mil-Std 202F, Method 213B, Test
Salt Spray . . . . . . . . . . . . Per Mil-Std 202F, Method 101D, Test
Thermal Shock . . . . . . . . Per Mil-Std 202F, Method 107F, Test
Moisture Resistance . . . . Per Mil-Std 202F, Method 106F, Test
Environmental
Mounting Specifications
1.734 [44.04]
.867 [22.02]
L-Series Sealed Rocker Switches
Panel Thickness Range
Acceptable Panel Thickness
.030 to .156 (.76mm to 3.96mm)
Recommended:
.030, .062, .093, .125 and .156
MOUNTING HOLE
protection as applied to electrical
equipment in accordance with IEC
529, BS 5490, DIN 400 50 & NFC
20 010.
B-845, Method H, with 3 years
exposure.
Condition A 0.06 DA or 10G’s 10-500
Hz. Tested with VCH connector. Test
criteria - No loss of circuit during test
and pre and post test contact resist-
ance.
24-50 Hz 0.40 DA
50-2000 ±10 G’s peak
Results Horizontal Axis 3-5 G’s max.
Random
24 Hz
60 Hz
100 Hz
200 Hz
2000 Hz
No loss of circuit during test; <10µ
chatter.
Condition K @ 30G’s. Tested with
VCH connector. Test criteria - No
loss of circuit during test, pre, and
post test contact resistance.
Condition A, 48 Hrs.
Condition A, -55°C to 85°C. Test cri-
teria - pre and post test contact
resistance.
Criteria - pre and post test contact
resistance.
TEST CUT
MATERIAL
HOLE IN
ACTUAL
0.06 PSD-Gsq/Hz
0.50
0.50
0.025
0.025
61