JWL22RAA-RO NKK Switches, JWL22RAA-RO Datasheet - Page 9

• Manufacturer Part Number: JWL22RAA-RO
• Description: Rocker Switches & Paddle Switches 16A DPDT ON ON BLK
• Manufacturer: NKK Switches

Specifications of JWL22RAA-RO

• Contact Form: DPDT
• Switch Function: ON - NONE - ON
• Contact Rating: 16 Amps at 125 Volts
• Termination Style: Lug / Quick Connect
• Actuator: Rocker
• Mounting Style: Panel
• Terminal Seal: Epoxy
• Contact Plating: Silver
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 633-JWL22RAA JWL22RAA

B
Series JW
B48
Operating Environment
• Do not install switch where heavy dust collection occurs. Dust build-up under rocker may affect switch actuation.
• Do not actuate switch if submerged in water or oil.
• Installation is not recommended on horizontal surface in an environment where frequent splashing of
Panel Mounting
• Before snapping a switch into the panel, align the gasket evenly under bezel of the switch.
• When mounting into a panel, apply equal pressure to sides of bezel and insert parallel to panel.
• After mounting a switch, be sure there are no gaps between switch and panel.
• After installing into panel, do not apply excessive force.
• After panel installation and wiring is completed, do not apply force horizontally
• Behind the panel, cut area should be squared. If front of panel is painted, do not allow any paint to collect in
• Avoid reinstalling a switch once it has been mounted in a panel. This may cause deterioration of panel sealability.
water may occur. In such an environment, a minimum 30° angle installation is advisable. If there is
a possibility of freezing, install vertically so no moisture will be retained within switch housing.
Lightly push into panel.
or vertically from behind panel.
corners of cutout to prevent level mounting.
PRECAUTIONS FOR HANDLING & STORAGE FOR JWMW/LW (PANEL SEAL TYPES)
www.nkk.com
High Inrush 10 & 16 Amp Rockers
Incorrect
Correct
Clean Edges
30°