E2C-CR5B2 Omron, E2C-CR5B2 Datasheet - Page 12

• Manufacturer Part Number: E2C-CR5B2
• Description: Proximity Sensors SEP.AMP.PROX. 2MM 1.2mm DIST
• Manufacturer: Omron
• Type: Inductive Proximity Sensorr
• Series: E2Cr

Specifications of E2C-CR5B2

• Maximum Operating Temperature: + 55 C
• Operating Supply Voltage: 10 V to 26.4 V
• Sensing Distance: 0.5 mm
• Minimum Operating Temperature: 0 C
• Sensor Type: Inductive
• Sensing Object: Metallic
• Response Frequency: 1kHz
• Material - Body: Stainless Steel
• Shielding: Shielded
• Voltage - Supply: -
• Output Type: -
• Terminal Type: 2-Wire
• Package / Case: Cylinder
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

E2C-T
J PROCESSING THE SENSOR CABLE
Because of the Amplifier Unit’s slim construction, the end of the
sensor cable connected to the E2C-j must be processed as
shown in the following illustration.
Note: 1. Be sure to turn over the braided shield, so that none of
J INFLUENCE OF SURROUNDING METAL
If the Sensor is embedded, be sure to separate the Sensor from
surrounding metal objects, as shown in the following illustration.
Note: Figures in parentheses indicate outer diameters of
Cat. No. CEDSAX4
Part number
E2C-CR5B2
E2C-CR8j
E2C-X1A
E2C-C1A
E2C-X1R5A
1-800-55-OMRON
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
ENDS
Sensor cable
2. Make sure that the insulation distance of at least
shielded models.
Although the E2C-CR5B2 is a shielded model, this model
cannot be embedded in metal.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
its thin wires are left.
2.5 mm is maintained.
ℓ
2
0
0
0
0
(0.20)
5
R
14 max.
See Note 1.
d
6
(3.5)
(5)
(5.4)
(8)
2.5
d dia.
11/01
See Note 2.
7 to 8
4 to 5
D
2
0
0
0
0
OMRON ON- - LINE
Global - - http://www.omron.com
USA - - http://www.omron.com/oei
Canada - - http://www.omron.com/oci
m
1.5
2.4
3
3
4.5
Specifications subject to change without notice.
(mm)
J MUTUAL INTERFERENCE
If more than one Sensor is located face-to-face or in parallel, be
sure to maintain enough space, (as provided in the following
diagram), between adjacent Sensors, to suppress mutual
interference.
The mutual interference of the Sensors can be prevented by
cable length selector settings. However, the result is a change in
the coil characteristics of the Sensors, and the specified ratings
may not be satisfied in all permissible temperature or sensing
distance ranges. Test the operation of the Sensors before using
them in an actual application.
Note: The cable length of E2C-CR5B2 cannot be adjusted, so
mutual interference cannot be manipulated for this sensor
using cable length selector settings.
(0.79)
20
(0.59)
15
OMRON CANADA, INC.
416-286-6465
885 Milner Avenue
Scarborough, Ontario M1B 5V8
E2C-T
Printed in U.S.A .